If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Still trying, but so far it's 28.0 grains of Varget and 123 grain SMK's. Also tried BL-C(2), and 4895. Shot some 107 grain SMK's with BL-C(2), had no good results.
One of my favorite accuracy loads is Noslers 100 grain Ballistic Tip over 29.9 grains of Benchmark with a CCI 450 primer @ 2.250" OAL. It shoots around 2750 FPS out of my 20 barrel.
Best groups I've gotten have been with 28.6gr Leverevolution with win srp under a lapua 123 scenar at 2.260. Just nearly as good is 28.8 8208xbr. I also got good results with the Hornady 123 A Max at 28.2 gr LVR with win srp & next down the line was 26.0 of 8208xbr. The load range that is accurate is a very narrow margin for me. .2 gr up or down especially under the hornady had a tremendous affect on accuracy & I had sort of similar results with the lapua but it didn't seem quite as touchy. The XBR was more sensitive to load variations as well, for me. That is why I settled on the LVR at 28.6. Best accuracy, least sensitive to slight variations.
MLM
30 Grns Win 748 with a 120 grn Nosler Ballistic Tip... Sub 1/2" at 100 when I do my part
Shot several 3.5"-4" 500 yd groups
Thats out of an 18" AA Button barrel
I use 29.9 grains BM with 90 TNT- vel of 2856 from 24 inch OW, 29.6 grains of AA2520 with 123 Scenar-vel of 2623 from 24 inch OW, and 30.3 gains of AA2520 with 120 grain PPU HPBT-vel of 2733 from 24 inch OW.
I use 29.9 grains BM with 90 TNT- vel of 2856 from 24 inch OW, 29.6 grains of AA2520 with 123 Scenar-vel of 2623 from 24 inch OW, and 30.3 gains of AA2520 with 120 grain PPU HPBT-vel of 2733 from 24 inch OW.
Comment