I've got a bunch of TAC on hand and will be loading for an 18" 1-in-8" rifled barrel.
TAC Loads for Grendel?
Collapse
X
-
-
Here is the reloading data from the old 6.5 Grendel forum. USE WITH CAUTION AND ON YOUR DISCRETION. I CAN NOT VOUCH FOR THE ACCURACY OF THE POSTED INFORMATION Case Bullet Powder Charge Primer OAL Forum Member . Lapua Sierra 85 gr. HP BL-C(2) 30.5 gr. CCI #450 2.200" . Lapua Sierra 85 gr. HP H-335 30.0
Comment
-
-
I've loaded 30.0 grains TAC with 95 grain V-Max which shot good and 28.5 grains of TAC with 120 grain Sierra Pro Hunter Soft points which have shot as good as anything I've reloaded so far in the 6.5 Grendel. I'm shooting these in a J&T 16" H-bar and no signs of pressure with either using Hornady brass.
Comment
-
-
Schwag, I have Used 29.8 Tac for the 100 gr.'s , 27.5 Tac for the 130gr., --28.6 Tac. gr. for the 120gr., 26.4 Tac-140 grn. speer hotcor=.,= Back off as a start point by, at least a .5 grn.- on all. Tac is easy to work with- don't overdo it , and all is well. I used it to fireform a few AK brass=7.62x39, & an 87-100 grn. pill , over 24--26 grn. of Tac. (Federal, &, Sell. & Bell brass were my faves.) Sorry , I have no data for the ( Target only- bullets).
Comment
-
Comment