Any suggestions on very accurate loads?
Varget loads with 123 gr AMAX
Collapse
X
-
Originally posted by Tim Davis View PostAny suggestions on very accurate loads?
2) Use XBR 8208 or maybe BLC-2
Varget is too slow, can't get enough in the case.
Start around 27.5-28 grains of either of the other 2 and work up. You might also consider TAC or 2520, at similar weights.
-
-
I agree with Bwaites. I tried Varget just because I like the powder..it didn't work out well. It didn't hurt anything, but just wasn't giving me a reasonable velocity. I now use W748, TAC, BLC-2, or AA2520. BLC-2 is only used if I don't have anything else available, and need ammo immediately....a situation I try like the devil to avoid.
Comment
-
-
Originally posted by bwaites View Post1) Change powders.
2) Use XBR 8208 or maybe BLC-2
Varget is too slow, can't get enough in the case.
Start around 27.5-28 grains of either of the other 2 and work up. You might also consider TAC or 2520, at similar weights.Originally posted by noone View PostI agree with Bwaites. I tried Varget just because I like the powder..it didn't work out well. It didn't hurt anything, but just wasn't giving me a reasonable velocity. I now use W748, TAC, BLC-2, or AA2520. BLC-2 is only used if I don't have anything else available, and need ammo immediately....a situation I try like the devil to avoid.
Comment
-
Comment