Hello guys (and girls)
I'm new to the forum and the Grendel as I kinda just fell into one. Ive wanted one for a long time and thought it would make the ultimate coyote riffle and a step up from the 223 I have been using. Just as fate would have it I had something the owner of this thing wanted so the trade was on.
Upper
AA 6.5 marked upper receiver
Sabre Defense SPR 18" fluted barrel with a 1-7.5 twist rate and matching Sabre bolt (came as a package)
Sabre Defense Gill brake
PRI low pro gas block
Hogue 12" free float tube, knurled, which has a JP Enterprises sling stud attachment mounted to the bottom front for bipod
Bushmaster carrier and small BCG parts (I believe)
Lower
Spike's Tactical lower receiver
RRA 2 stage trigger with JP Enterprises 3.5lb spring kit and original RRA springs go with the rifle
Milspec lower small parts (mostly DPMS)
RRA star style ambi-safety
Samco G27 grip
Magpul Moe trigger guard
Midwest Industries ambi sling plate
CAA Sniper stock with monopod, adjustable cheek rest, adjustable buttplate, mounted on an RRA tube with RRA buffer and spring
I also added an accuwedge and I think it was M16 clinic buffer pad to the standard buffer.
My question is 18" tube and 7.5 twist what is the best BC bullet/powder combination should I start with. I have messed a little with 123 AMax and XBR8208 but not getting the accuracy I'm looking for. I think I went up to 28.5 and it was right at 2500FPS .75MOA probably
Thanks for your input
I'm new to the forum and the Grendel as I kinda just fell into one. Ive wanted one for a long time and thought it would make the ultimate coyote riffle and a step up from the 223 I have been using. Just as fate would have it I had something the owner of this thing wanted so the trade was on.
Upper
AA 6.5 marked upper receiver
Sabre Defense SPR 18" fluted barrel with a 1-7.5 twist rate and matching Sabre bolt (came as a package)
Sabre Defense Gill brake
PRI low pro gas block
Hogue 12" free float tube, knurled, which has a JP Enterprises sling stud attachment mounted to the bottom front for bipod
Bushmaster carrier and small BCG parts (I believe)
Lower
Spike's Tactical lower receiver
RRA 2 stage trigger with JP Enterprises 3.5lb spring kit and original RRA springs go with the rifle
Milspec lower small parts (mostly DPMS)
RRA star style ambi-safety
Samco G27 grip
Magpul Moe trigger guard
Midwest Industries ambi sling plate
CAA Sniper stock with monopod, adjustable cheek rest, adjustable buttplate, mounted on an RRA tube with RRA buffer and spring
I also added an accuwedge and I think it was M16 clinic buffer pad to the standard buffer.
My question is 18" tube and 7.5 twist what is the best BC bullet/powder combination should I start with. I have messed a little with 123 AMax and XBR8208 but not getting the accuracy I'm looking for. I think I went up to 28.5 and it was right at 2500FPS .75MOA probably
Thanks for your input
Comment