PDA

View Full Version : Unused LMT L291B 2nd Gen Stock $40



pinzgauer
06-06-2011, 01:09 AM
SOLD

Selling an unused LMT Generation 2 Collapsible Buttstock (Buttstock Only) model L291B $40

http://pinztrek.com/ebay/m4_lmt.jpg

Sells for $58 from LMT (http://www.lewismachine.net/product.php?p=6&cid=3&session=1e59cf801b92a24eb78bc7b706ea4692)

Decided to go OD and use a CTR instead. This is a very nice stock, and per LMT is stronger than typical M4 & clones. Fit's Mil-Spec tubes.

USPS Money Order or Paypal accepted

US Priority Mail shipping $6.75

Email or PM me if you have any questions

http://pinztrek.com/ebay/m4_lmt_2.jpg

michaelmew
06-07-2011, 07:01 PM
Is that 4 position or 6? Does it come with any of the other hardware?

pinzgauer
06-08-2011, 02:05 AM
It would normally be used with a 6 position mil-spec buffer tube (receiver extension).

It's the stock body only, you would need the receiver extension, end plate, and castle nut. As well as a spring & buffer of your choice.

The LMT is a cut above the normal generic M4 clone stocks, extremely well made, minimum rattle. They re-enforced it for use with their larger weapons. (7.62 & 40mm).

You can get a milspec stock hardware kit here (http://dsgarms.com/ProductInfo/DSAMILSPECKIT.aspx) for $50, or the parts minus spring & buffer for around $32.

But this stock body would be ideal for someone looking to upgrade an existing setup or a build who already had milspec hardware kit.

The complete stock kit from LMT would run $130-150 if available.

I decided to go OD on my build, or I would have used this.