Guys helping guys fix gun problems
I have a new 16" AA upper and will be putting it on a BushMaster lower. I traded into 2 "Clinton era" collapsables that didn't collapse. I made...
So, I received my barrel today. It's chambered in .264LBC. I sent the company a bolt to ensure headspacing was correct during the build. Put the gun...
Put together a new rifle and was not pleased with the groups when i finally got around to testing the rifle for the first time. If i had to...
I just picked up a used Grendel. It is a 16inch AA upper on a rifle stock double star lower. First thing I noticed was the buffer rattled. Like...
Let me prologue by saying I'm not a gunsmith, nor reloader. We have been using factory loaded AA 120gr. Barnes and AA 120gr. Nosler. Here is the...
Ok, so this is my first build and I just got some ammo and was just checking if it would feed and eject ok without firing. maybe that is the problem....
I have gathered some information about gas port diameters that I thought I would share with this forum. These 3 examples are all 6.5 AR barrels. I am...
Took my new Grendel to the range for the first time Friday and found the following 3 issues: 1. 1st shot from a loaded (5 rounds in a 10 round mag)...
Finding dents on my ejected case main body (my Satern Spartan home build, see first picture). I don't get this dent on my AA built Entry upper. The...
I have an issue that I can't seem to get figured out. When I shoot my last shot my bolt doesn't lock back. I can pull the charging handle back on...
Where do I find one?
I have a 24in barrel with bolt from J&T distributing. Currenty i'm having to seat the bullets to a COL of 2.20 or less depending on the bullet in...
Rifle shoots great small groups first round fires second some times does not always lock up sticks partially closed. Using hornady brass rim of case...
I recently purchase a chrome 6.5 Bolt, at a premium, from a member here. It seems like it is defective. I’ve tried multiple Cam Pins, and none will...
Im posting this as a potential fix for failure to feed issue. I was experiencing multiple failure to feed issues with my AA overwatch on custom...
Several times this past weekend after hunting I had one heck of a hard time getting the chambered unfired round to eject. The charging handle would...
Went to the range yesterday to run another ladder test. About half way through I started having mis-fires due to light pin strikes. The primers show...
I have a new Grendel I am troubleshooting. The pic below shows 5 cases that were fired in my rifle. The rounds were factory 123 Amax rounds. The...
Well after much help on this forum I still can't get this thing to shoot. I have purchased the best possible parts I can afford to everyone's advice...
I have a Model 1 16" CAR 6.5 sporter. I broke a few bolt lugs and I am looking to replace the bolt. I am hoping someon can help me out with...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
