Factory ammunition performance, handloading data, and discussion
By Name: https://dl.dropboxusercontent.com/u/34132774/Grendel%20Bullet%20List%20Alpha%20April2013.pdf By weight:...
Here is an updated list of projectiles ranging from 85gr-130gr. Since a few hunters have seen great results with 140gr bullets, and the 160gr are...
Alexander Arms http://www.alexanderarms.com/images/pdfs/grendel_reloading.pdf Hodgdon http://data.hodgdon.com/cartridge_load.asp Ramshot...
Here is the reloading data from the old 6.5 Grendel forum. USE WITH CAUTION AND ON YOUR DISCRETION. I CAN NOT VOUCH FOR THE ACCURACY OF THE POSTED...
I've been meaning to post this for a while, but I keep forgetting. Anywhoo... Ever so often folks inquire about the source of the little ding on...
What does the SJ designation mean when looking to buy 123gr Lapus Scenar bullets. I've seen the designation on Powder Valley's site and noticed there...
Never had a problem with any cartridge until the Grendel. When I seated bullet with the original seater stem in my Wilson seater, it would leave a...
Iam going to load some 120gr nosler ballistic tips and the powder I have on hand is RL15 and A2520.. Is either of these recommended for this round?...
Can anyone point me in the direction of some grendel mags? Iam lookin for some 10 round mags. Ive tried AA, midway ect.... Thanks,
I got some cheap 95 gr Vmax and have the BL(C)-2 open. Where do I start working up my load? I asked Hornady and they have nothing and could not get...
ntx
First off many thanks to bwild's very informative postings. The speeds he was getting with CFE223 inspired me to try it in my rifle. 6.5 grendel...
Got a box of Nosler 130g Accubond's. Have AA Lapua brass, have both Rem 7.5 and Fed match small primers and have 8208 XBR and Reloader 15 powder. ...
I know there are a couple of reamer specs for the Grendel with the double angle of the AA origonal and the saami spec single angle throat. In New...
Howdy Guys, I was wondering if there was a case that can be reformed to make the Grendel Brass? I do not want to HYdro!??! Everytime someone post...
I just tried reloading the 6.5 for the first time and for some reason the bullet seating die crushed the neck on the two cases i tried. Useing brand...
I've made a few attempts to develop a subsonic load for my Grendel (20" Satern) with out much success. I started using 140 grain Hornady spire...
I've got about a week before a shoot and need a load to come close to the Hornady factory load which I have a couple hundred rounds of. My chrono is...
I saw a thread this morning that got me thinking of the overall length of the Grendel cartridge that got me thinking of the length of the various...
Hello hallowed members of the hoard. The following are the reloading sets I am able to find in the UK, I have an RCBS press and already roll my...
Ok guys I need some help.. I have been reloading for over 30 years and have never had any respect for Hornady brass (used to be "Frontier" head...
Just wanted an opinion from the hoard--I was reloading quite a bit in the early '90's then relocated. Just setting up to reload again, I have...
I want to get a Noveske Switchblock for my 6.5 build but the switchblock is caliber and barrel length specific. So I was wondering if the gas...
I have been trying cfe 223 with the sierra 123 hpbt match bullets. finally got a non windy day so i could chrono some loads. First off i will...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
