I have a Savage Model 11 S/S that I swapped out barrels and bolt head to make it a 6.5 Grendel because I love the the round. Now to the problem, lately when I go to the range usually 2-3 rounds out of a 50 round reload will not pop the primer. I can put them in my AR15 in 6.5 Grendel and they pop fine. This only happens in my bolt gun. I have taken the bolt completely apart several times to check each piece, to make sure nothing is broken or dirty. My guns are spotless and they stay that way, but this primer thing is driving me nuts. I have used Rem 7 1/2, CCI#450, Wolf small rifle primers, etc.... Since the trigger has nothing to do with the bolt, could the mainspring in the bolt be bad? If so, from what I understand from Savage they don't make heavier main springs, but I might fine one aftermarket. Anyone had this issue and had to fix it. Any hekp would be appreciated. Having the rifle go click in a match is embarrassing, not to mention nerve wracking.The firing pin hits the primer cause there is always a mark, but not hard enough.
Thanks guys
Thanks guys
Comment