I have some parts that will fit a 9/16x24 threaded barrels that are .740 at the end (.750 Gas Block). Comp is ported for the .264 + .040.
Satern Heli-Port SS Blended to .740 $90, crush washer not needed (non blended from Satern are $79.99) I have 5 on hand, if they sell, I'll make more.
9-16x24 Heliport 2.jpg9-16x24 Heliport.jpg
9/16 SS Crush washers- $10 (20 Available first come first serve, I will get more if these sell)
9-16 SS Crush Washer.jpg
9/16-24 Comp opened for 6.5 Grendel (.264 + .030 to .040). Has 2 holes on each side @11 degrees and off center to keep FOV clear during cold shooting or any smoke, with SS Crush Washer $90 (6 on hand, can get more if needed)
9-16x24 Comp.jpg 9-16x24 Comp side.jpg
Shipping is USPS $6 flat rate box,
If buying only 1 washer, it will ship in an envelope and is included in the $10 to lower 48 states
PM and they will be sold in the order received.
Edited to correct title--Stated 9/16x26, I believe 9/16x24 is correct from reading the thread itself. Bill
Satern Heli-Port SS Blended to .740 $90, crush washer not needed (non blended from Satern are $79.99) I have 5 on hand, if they sell, I'll make more.
9-16x24 Heliport 2.jpg9-16x24 Heliport.jpg
9/16 SS Crush washers- $10 (20 Available first come first serve, I will get more if these sell)
9-16 SS Crush Washer.jpg
9/16-24 Comp opened for 6.5 Grendel (.264 + .030 to .040). Has 2 holes on each side @11 degrees and off center to keep FOV clear during cold shooting or any smoke, with SS Crush Washer $90 (6 on hand, can get more if needed)
9-16x24 Comp.jpg 9-16x24 Comp side.jpg
Shipping is USPS $6 flat rate box,
If buying only 1 washer, it will ship in an envelope and is included in the $10 to lower 48 states
PM and they will be sold in the order received.
Edited to correct title--Stated 9/16x26, I believe 9/16x24 is correct from reading the thread itself. Bill
Comment