Search:

Oh, and put me down for 250 and I would suggest 103-113 grain projectile.

You have to shoot the deer long ways to retrieve one. I've shot two deer this way and retrieved both barnes bullets. The first was a doe at about 125lbs. I shot her through the front right...

3011
I just noticed these bullets a few weeks ago and thought I would give them a few shots since the 100gr barnes ttsx's are all gone!. These bullets are very nice but made of brass which...

So you had to "pay" for a distinguished marksmanship status? Any title I had to pay for isn't a title worth winner. Though, congrats either way.

if you look at the pictures, the worst looking pieces of brass have the greatest "belt" to them. Those cartridges weren't fully chambered when you fired and you are very lucky you haven't had metal...

try backing the seating die out and turning the spindle down to get the right seating depth. The seating die should NOT be all the way down to touch the shellholder on the press like when FL sizing...

I'm glad you just said something about "belted cases" LR52 because to my knowledge, in a semi-auto for the grendel chamber, there is none. It looks like your bolt isn't closing all the way and...

Information about ogive length only works with the person reading the caliper. There are a few different ways that most people measure ogive so giving that value only confuses the situation on this...

ASC mags work perfectly when coal is 2.270" with longer heavier bullets or 108 scenars. Pmags work perfect with 100gr barnes TTSX bullets seated to 2.260". I can fill a 20 round 5.56 pmag with up...

If your brass is measuring 1.610" - 1.630" in length then your case is too long and will crumple around the bullet when you chamber it, if you can force it closed. Case length should be 1.515" or at...

I don't think any of my barrels are angry, but it's a good idea to shoot them a little more just to make sure all of their stresses are relieved...maybe then a dunk in some dry ice cold beer will...

cleaning is important, but don't think that your accuracy is truly going to be affected if you do not clean unless it's in a competition past 500 yards. I have an 5.56 NATO barrel that has over...

scenars for targets/small game, ttsx for everything else

I would go on to say that even if you aren't able bodied, an AR or two should grace every household...just for safety and/or rodent and/or terrorists problems that might come up.
Mark VII,
I'd...

the hocus pocus takes you out of focus. when you think about something, eating, driving, hiking...you do it. if you think about a pulling a shot, then you will probably pull that shot. start...

nachunter der toten,
Welcome to the Forum,
The 100 ttsx from barnes has a decent b.c. for the range the grendel is really good at and holds a really good group out to 600 yards (it's...

I went with a Geissele DMR - set first stage to 1 - 1.5lbs. and the second to 3lbs. I swap out uppers to use with that lower now when I shoot.

Bjorn,
I think you'll be alright letting the gun sit if you live in Texas in a place where the air is dryer. I've noticed here in N.C. that moisture likes to build up on carbon especially in...

We all have our own data we've collected and some of us know how to understand it. Not my problem if you can't. Sorry I upset you guys. No worries, I forgive ignorance all day long.

cory,
Just got a set of Redding dies in, the comp type s bushing seater and the comp FL sizer. both are the best dies I've ever used.