I purchased the Manson Military Re-Crown kit to recrown my Kimber 82G 22lr match rifle. My first crown was a marlin bolt rifle so I could learn how it worked. It's very easy to use and does a burr...
Type: Posts; User: Greyfox
I purchased the Manson Military Re-Crown kit to recrown my Kimber 82G 22lr match rifle. My first crown was a marlin bolt rifle so I could learn how it worked. It's very easy to use and does a burr...
IMR 8208 XBR works for me at 200-300-600yd matches.
Take the upper off the lower. Take out the carrier/bolt and put it about where it would sit on top of the lower if it was together. Now push the carrier into the buffer so it goes into the tube as it...
Hardhead. My first 5 shot group at 600 yards was 4 3/8" with the Grendel chamber. Both LW barrels will shoot sub moa at 600 yards. I shot my best score at 600 with the css chambered barrel.
Greyfox
I too had a very long wait for my LW barrel. When I got it I sent it back because the bolt would not close on my PTG GO gauge. Woody sent it back to me and said they cut my chamber to zero headspace...
dega37. Use a caliper to measure your case at the base, shoulder, neck,etc. Your dies should resize the case smaller than a fired case dimentions. To measure how far you push the shoulder back toward...
dega37. Hornady sells the "Lock-N Load Headspace Gauge" set. It's allot easier to use than my "Wilson Case Gauge". Both are very good to have. You will need a caliper to measure with ether one you...
I had a loaded round that would not chamber. I found out that the brass was over 1.526". I pulled the bullet and trimmed the brass back to 1.520,reloaded it, and it chambered just fine. None of the...
Hornady dies will work with your .295 neck. My LW barrel has a tight chamber and .295 neck like LB's.
I had to grind down the top of my shellholder to size my brass enough. I have zerro headspaced...
A headspace gauge is a precision made tool. To prevent damage to your no-go gauge need to remove both the ejecter and extracter. To properly headspace there has to be no resistance when useing the...
I have both Forester and Hornady dies.Both are excellent dies.The Forester dies come with the right size decaping pin for Lapua brass. The Hornady has two different sized pins included with there...
A good shooting bench and chair/stool, range finder, 8x min-10x best binoculars, Harris BR notched swivel bipod with accu shot for stock, or a Sinclair benchrest rest and sandbags in the rear. Snake...
http://www.midwayusa.com/product/2124475110/frankford-arsenal-flip-top-ammo-box-512-22-br-bench-rest-68-remington-spc-762x39mm-russian-50-round-plastic . Go to MidwayUSA and type 791979 in the search...
http://sdtribalrelations.com/tribaltourism.aspx
You can find information on the Tribes here.
We hunt on the Cheyenne River Sioux tribe. License cost is $90.00. Each tribe has different cost...
There is alot of Tribal land and National Grass Lands in South Dakota. Shot both places and had a good time. So far we have not shot on private ranches off the Resevations.
I served with the 101st Airborne in Viet Nam from Sept 68-Sept69. My unit was C 1/501 Inf. We carried the original M16A1 with the three prong flash suppressor. We were out in the field for all 12...
If your question is "will a loaded round fit in a Wilson case guage" the answer is yes. I have one and it is designed to use as a head space guage and overall case min / max lenght guage. It does not...
slimjim. I use a M16 legal Danial Defence carrier. BCM carriers are great too. I have both and as long as they are the heavy carrier your good to go. An M16/AR15 carrier should not be cut out of...
CTS
Looks to me that your doing a very good job at reloading. Keep up the good work.
It seems that you have a short throated chamber. You are right in wanting to seat .010 off the rifling.
...
TurboFour. Check out my answer to CTS in reloading.
Greyfox