Search:

If your extension tube (part # 8 in the graph) is a Clinton AWB post-ban, you need a new extension tube as well. If your OD is 1.165", you do have a commercial dia. tube.

I would just get a...

If you don't have it already, get the 6.5 Grendel Reloading Handbook and refer to any of the manufacturer-supplied and pressure-tested loads.

I just went through this process when I removed a DD RIS II handguard from an AA 20" GDMR for the Cerakote job I did.

Tap out the gas block pins if you can. I use the Brownell's...

Welcome.

I found the G7 BC that the German guy uses for the 123gr A-MAX, and it is .218 out to 950m for him. He said that the 140gr A-MAX published BC works perfectly as-is, and I think this is out of a...

I have to say that I've been referring to the 6.5 Grendel Reloading Handbook more than I thought I would, especially with all the questions forum members post when looking for load data or starting...

How important is it to find out who did the machine work and anodizing after Cerro Forge cranked out the blank"

DSA engraves their uppers with "DSA" above the gas tube hole on the receiver face.
...

What ranges do you need to shoot out to, what target sizes, and what do you want to happen when the bullet hits?

7mm RSAUM or 7mm WSM, which is also very expensive, but not as bad as .338 LM
.260...

It is a forge code from the aluminum forger. They start out as a plate, which is pounded into a blank, then the plate is cut off. You can still see this plate line on most of your forged lowers. ...

Interesting observations that support probably a century of data. I noticed the same with a Precision Firearms load that spiked up to 2583fps on me from my 16" barrel on a hot day, when that load...

.264 Win Mag is insane flat-shooting. A scorcher for sure.

For close range, the Grendel's advantage is a lighter gun, and much less recoil, with more than plenty of impact on steel targets, and very low wind deflection. The .308 will have more energy, but...

Did you see the guy that actually said he wished that criminals were the only ones who had guns, that way he wouldn't have to worry about his neighbors and "they could narrow it down better if only...

I have coated a lot of AR15 mags, and even some Mini-14 mags for a friend. I did a comparison of Alumihyde and Cerakote on my Grendel mags, and the Alumihyde scratches off easily, while the CK...

I don't know of any businesses in this industry that can handle the customer service communication demand, as well as production demand simultaneously, especially in an era where the populace has...

When you say, "long range hunting", what kinds of distances are we talking about, and what type of game?

With an 18" cut-rifled barrel that will hold 5-round groups around 1/2 MOA, in the hands of...

The 18" Grendel does well out to 600yds, and on calm wind days, can hit 800 or 1000yds as well, depending on how accurate your barrel is, what load you're using, your ability to gauge the wind speeds...

I've been using Strelok on my phone, and I recorded the pressure and temperature data when I zeroed. I make it a point to enter my pressure and temp data whatever the environment is, and so far, my...

Flattening primers in a gas gun is often ok, as long as you're not seeing erratic jumps in velocity, cratering, or pierced primers. In bolt guns, it can be a sign of extra headspace, even when loads...

Sweet! That was fast load-test-to-kill time if I ever saw it.