Do a search for melting of feed ramps. Lrrpf52 had a good thread with pics on it. I did mine, was still getting scratches so I shortened my ejector spring, no more scratches.
Type: Posts; User: ricsmall
Do a search for melting of feed ramps. Lrrpf52 had a good thread with pics on it. I did mine, was still getting scratches so I shortened my ejector spring, no more scratches.
could be that your feed ramps need blending with some fine wet/dry sandpaper, or you are hitting locking lugs. polish the inside of feed lips on mag as well. if you continue to get scratches up high,...
since we are on the subject, how do you guys loads compare charge weight size between hornady and lapua brass? Ive been toying around with both and notice some difference in velocity, but my gun...
everything Ive seen on here and in the grendel reloading handbook indicates 18" with RLGS is near perfect. I see you have an adjustable GB, so you should be fine at 18".
welcome to the horde
welcome! there are many knowledgeable and helpful people on this board to help you on your build. Lots of tricks and tips, so if you have questions you will get good info. Good luck on your build and...
Roger that. Thanks lars, I'll see what I can do for ya.
What a deal! What's the round count? I'm going to a shoot on my property in Alabama on Saturday, I'll mention and show pics. One of my buddies has been buying everything he can find lately. I'll let...
My thoughts exactly Cory!
I had seen uppers at midway for several years, and paid not too much attention to it. I then read an article by David fortier that referred to his 20 inch gdmr as a laser, the research started that...
Spurrious, try T&F firearms in Thomasville, ga. A lot of his work is shown on Tallahassee gun forum. All I've seen looks great. I plan to take my Grendel to him when I wring it out and make sure...
Agree with bwaites. The only way my Barrett would shoot exceptional was with HSM match ammo. Mine was a model 99 though, built for accuracy with 32 inch match grade bbl.
ups it to yourself at lr52,s location when you go there on vacation to one of his DM courses.;)
everything ive seen said 242 or 243 loctite. I was wondering about the bearing seat loctite, sounds like it would take a lot of heat to remove.
You should be fine KTC. .002-.003 isn't much.
you have more options with a .750 GB especially if you go adjustable. I went with with .875 and wish I had gone with .750.
Go back and reread all the posts from beginning. Your question was already answered. I think he said go back and look at pictures because it clearly shows that m4 extension in rifle receiver is gtg....
That would be correct. The more you mess around with this stuff, the more you will see minute differences in chambers, bullet profiles, factory ammo, etc.
everything ive seen on AA barrels has been excellent. Dont underestimate a good button pipe.
If youre getting 9264fps out of a grendel and not dead, I want the recipe!:)