Search:

For Lapua brass the Avg. Wt. of 10 Grendel cases is 111.15 grains and for Hornady brass the avg is 117.1 grains

31.g of CFE223 under a 130g Berger has been working very well for me, nothing unacceptable pressure wise, slightly flat primers. I have also been getting very good results with the same charge of...

I have experimented with weighing brass and sorting them out by .3 grains of difference using Hornady brass. My goal was to find out if this provided an advantage in achieving a lower extreme spread...

You really need to find out what your chamber will allow by measuring it yourself, 2.250" OAL using the 123 NCC may be too long for your chamber as it is for mine. I can load the NCCs to a max of...

It looks like Oregon is jumping on the "ban anything with a trigger" BanWagon!!

http://www.oregonlive.com/mapes/index.ssf/2013/02/oregon_gun_control_bill_attrac.html

HB 3200

ducks-and-bucks, after reviewing my data for RL-15 and 120g class of projectiles: 2590fps is little bit on the high side for 28.7g of RL-15. That's about what I get with 29.5g of RL-15 from my 24"...

A friend of mine recently received some 30 rnd. P Mags for his BeoWulf, we were able to get 12 Grendel, 10 BeoWulf, and 30 .223rem in both of them and they functioned perfectly.

I will commit to purchasing 250

CFE223 and LeveRevolution are providing the best accuracy and highest velocities for me, using 130g - 142g class of pills

You wouldn't be able to get enough powder in the Grendel case to make it a viable option.

Hopefully you can read its contents I tried to enlarge it as much as possible with out distortion.

I take much comfort in knowing where the management of local Law Enforcement stands on BS...

PowderValleyInc.com when they have them in stock, $26.00/100pcs

30.8g of CFE223, CCi 450, and a 129g SST @ 2.270" does very well for me!! MV is about 2600fps from a 24" barrel.

Start at 29g and work up.

Are Paramedics and EMTs or any other type of first responders covered in the description of "Doctors"?

Twice fired Hornady brass is holding 35.3g of H2O. From experience, I would say back off at least 1.5g when loading x39 brass.

Even at 450yds the 6.5 Grendel still beats the hell out of 1/4 in. steel plate.

I had 123g SSTs and 130g Norma Diamonds, there were also a few hits with a .223 Rem.

...

LT-32 will be closer to IMR 4198 in burn rate

And.. my question was in regard to the OP loading a short, light weight bullet; such as, a 95g Vmax or 85g SP that no matter how much neck tension you have, will not stay seated at 2.240" COAL.


...

Which projectile are you loading with?

Red Dot is a very fast burning pistol powder! Do not try to use it in the grendel in any loading.