6.5 Grendel deer stand rifle AKA mini recce
Parts:
MEGA forged lower - *Form 1 SBR*
Spikes LPK minus trigger group
Ergo grip
Geissele SD-C
Spikes trigger guard
IWC QD end plate
Spikes receiver extension
JP Silent captured spring
VLTOR Imod clubfoot
MEGA forged upper
MEGA Slide Lock charging handle
Lilja 11.5" fluted 6.5 Grendel barrel 1-8 Twist
SLR Rifleworks Sentry 7 adjustable clamp-on gas block
SLR Rifleworks gas tube
SLR Rifleworks Solo Ultralight Keymod 10" handguard
SLR Rifleworks Titanium barrel nut
AAC 51T flash hider / mount
Precision Firearms BCG
SWFA branded Bobro mount
Leupold VX-R Patrol 1.25-4
Now I need to get it sighted in before November 14th!
Upper Parts
65grendel_SBR_upper_parts.jpg
Partially Assembled
65grendel_SBR_upper_barrell_gas_block.jpg
Assembled
65grendel_SBR_assembled.jpg
Many thanks for everyone's input as this was my first time assembling an upper receiver.
I used Loctite 243 for bedding the barrel. I used Loctite 263 for bedding the gas block and sealing the gas tube to gas block connection.
I was able to fire a one shot function check and the bcg locked back on the empty mag! (I hope that means I was able to align the gas block correctly.)
This rifle has superb balance, I can't believe I waited this long to go the SBR route.
Parts:
MEGA forged lower - *Form 1 SBR*
Spikes LPK minus trigger group
Ergo grip
Geissele SD-C
Spikes trigger guard
IWC QD end plate
Spikes receiver extension
JP Silent captured spring
VLTOR Imod clubfoot
MEGA forged upper
MEGA Slide Lock charging handle
Lilja 11.5" fluted 6.5 Grendel barrel 1-8 Twist
SLR Rifleworks Sentry 7 adjustable clamp-on gas block
SLR Rifleworks gas tube
SLR Rifleworks Solo Ultralight Keymod 10" handguard
SLR Rifleworks Titanium barrel nut
AAC 51T flash hider / mount
Precision Firearms BCG
SWFA branded Bobro mount
Leupold VX-R Patrol 1.25-4
Now I need to get it sighted in before November 14th!
Upper Parts
65grendel_SBR_upper_parts.jpg
Partially Assembled
65grendel_SBR_upper_barrell_gas_block.jpg
Assembled
65grendel_SBR_assembled.jpg
Many thanks for everyone's input as this was my first time assembling an upper receiver.
I used Loctite 243 for bedding the barrel. I used Loctite 263 for bedding the gas block and sealing the gas tube to gas block connection.
I was able to fire a one shot function check and the bcg locked back on the empty mag! (I hope that means I was able to align the gas block correctly.)
This rifle has superb balance, I can't believe I waited this long to go the SBR route.
Comment