Leverevolution looks promising.

[DFHarley19]

Are you using AR 15 or Bolt? Your data seems too high for AR 15 so I assumed you are using Bolt.

[JCSC]

I have considered this powder myself. Thanks for the updates.

What kind of temp sensitivity does it exhibit?

[6.5 Grendel]

Are you using AR 15 or Bolt? Your data seems too high for AR 15 so I assumed you are using Bolt.

If your referring to my original post no it's an AR. Brass looks good, primer pockets still tight, web measurements are in spec as well. I have pushed 123s as high a 2650fps for hundreds of rounds no broken bolt or problems with brass. 2550 to 2600fps is no sweat using LVR.

[rookie7]

[HuntTXhogs]

PSA

My primer pockets are toast after 3x fired with LvrE -

Lapua Brass

[LRRPF52]

PSA

My primer pockets are toast after 3x fired with LvrE -

Lapua Brass

[Yondering]

PSA

My primer pockets are toast after 3x fired with LvrE -

Lapua Brass

[Grendelshooter]

[LRRPF52]

[Grendelshooter]

[6.5 Grendel]

May want to read this good info.

https://www.rifleshootermag.com/editorial/fact-fiction-gunpowder-temperature-sensitivity/83518

[Grendelshooter]

May want to read this good info.

https://www.rifleshootermag.com/edit...sitivity/83518

[Yondering]

[6.5 Grendel]

Hmmm I always work up a load in the weather, I will be hunting in. Keep good notes and load from that never let me down. Powder temp sensitivity is a non issue if you do a little work.

[biodsl]

Here's a dope card for 31.2 grains of CFE under a Amax 123 fired from my 22" Blackhole Weaponry barrel. It's calculated for 30 inches of mercury since I live essentially at sea level. I've taken multiple chrono readings at various temperatures to determine muzzle velocities at those temps and extrapolated 20 degrees and 100 degrees. It was work but it was fun too.

30BP Dope Card.jpg