130 Grain Berger bullets loaded with BL-C(2)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Flyguy11
    Warrior
    • Nov 2015
    • 111

    130 Grain Berger bullets loaded with BL-C(2)

    Coming this week I will be load testing

    To Be Tested:

    Rifle Specifications
    - Aero Precision Upper and Lower
    - Magpul MOE stock
    - KNS Anti-Rotation Pins
    - Mil-Spec Trigger (I know; I'll upgrade soon)
    - Brownells/ Saturen 18" Mid-length barrel (1in8 twist)
    - Syrac Ordnance Adjustable gas block (.750)
    - Nikon Predator 3X9 40mm scope on Nikon P-Mount (To be upgraded when budget allows)

    Ammunition to be tested

    - Lapua Brass trimmed to (1.520 in.")
    - CCI BR4 Small Rifle Primers
    - Berger 130 grain Tactical (Part# 26195)
    - Hodgdon BL-C(2) Powder

    Reloading Equipment

    - Lee Press
    - Forster Die Set (Full length re-sizing die/ non-micrometer seater die)
    - L.E. Wilson Trimmer

    Please let me know if you need more specifications and I will be posting pictures.
  • brut28481
    Warrior
    • Mar 2016
    • 117

    #2
    -tagged for results. What COAL are you running & charge ladder ?

    Comment

    • A5BLASTER
      Chieftain
      • Mar 2015
      • 6192

      #3
      Looks good sir.

      Shoot me a pm I have a vortex scope and RRA NM trigger I am not using if you looking to upgrade.

      Comment

      • Flyguy11
        Warrior
        • Nov 2015
        • 111

        #4

        The Mad Science at work bbbuuuhahahhahahahahaa

        Boxed for the range. Let the carniage begin.
        Last edited by Flyguy11; 07-12-2016, 04:04 AM.

        Comment

        • Flyguy11
          Warrior
          • Nov 2015
          • 111

          #5
          WARNING DO NOT USE THIS DATA; I am NOT your dad or reloading guide.

          The Paperwork.

          More Paperwork!
          I just moved in and I am looking for the calipers to measure the COL; I set up the dies before moving and still believe the forster dies to be dialed in.
          Last edited by Flyguy11; 07-12-2016, 04:27 AM.

          Comment

          • Flyguy11
            Warrior
            • Nov 2015
            • 111

            #6
            COL 2.273
            This is a little long but they feed in the magazine. The purpose of tomorrow’s exercise is grouping and a semi-ladder test at 200 yards no velocities will be recorded until I get a Chronograph (gotta buy one). Please DO NOT use my data and if you do it is at your own risk (I’m not your Dad!)
            COL will be addressed at a later date. I will do as much testing as I can but it’s a bit hot right now in Phoenix.
            End goal 500 yard kill machine and target fun.
            Last edited by Flyguy11; 07-12-2016, 04:29 AM.

            Comment

            • BluntForceTrauma
              Administrator
              • Feb 2011
              • 3897

              #7
              Lookin' forward to this and lookin' good!
              :: 6.5 GRENDEL Deer and Targets :: 6mmARC Targets and Varmints and Deer :: 22 ARC Varmints and Targets

              :: I Drank the Water :: Revelation 21:6 ::

              Comment

              • majohnson
                Unwashed
                • Apr 2016
                • 21

                #8
                If yours is as accurate as mine is, 500 will get boring fast even 600 was shooting a 16" gong. Good luck with the paper work.

                Comment

                • WillD
                  Chieftain
                  • Nov 2014
                  • 1257

                  #9
                  Looking forward to your results Flyguy11.
                  Are the data sheets your design?
                  Please post altitude and temperature if possible.
                  TIA, Will
                  Member since 03/2011, pre-SAAMI, Pre-crash

                  Comment

                  • Flyguy11
                    Warrior
                    • Nov 2015
                    • 111

                    #10
                    I have been swamped at work and know some folks have been waiting on these results. I will be posting some results hopefully by the end of the month! In the mean time I have a few upgrades that will be added to the rifle.http://i1214.photobucket.com/albums/...r-17-final.jpg http://i1214.photobucket.com/albums/...j/PA051327.jpg

                    Comment

                    Working...
                    X