Need help sourcing upper parts

[Grendel]

Need best balance of quality and price at one or 2 shops, unless they have free shipping.
I need;
Gas block
Gas tube
Upper receiver
Bolt
Mags

[mdram]

psa, brownells, joeboboutfitters, ect, ect there are tons of choices

just pick one, start looking and see if they have what you need

i think the upper will the the hardest to find right now, they done stay in stock long

[A5BLASTER]

JP for gas block and gas tube, get gas tube installed by JP one less headache

The rest I would shop at PF.

[LRRPF52]

AA upper
AA bolt ( as long as your chamber is meant for a .136" bolt face)
AA mags
AA gas tube
Brownell's Sadlak low profile gas block

https://www.shopalexanderarms.com/6_5_Grendel-Stripped_Receivers_Parts.html

[Frank45]

The rest I would shop at PF.[/QUOTE]
This^^^

[Grendel]

I think AA mags have the correct profile for the case tapper. The CPD grendel mags seem to be profiled for the 7.62x39 case tapper.

[kpswihart]

Not to hijack a thread, but hopefully add to it, is there a specific point of contact at AA that can assist with part selection, price, and availability? Maybe an email address someone could share. I'm a newb at building and am probably a little high maintenance with my questions. Added to that, I'm in Alaska so the time difference is a challenge to work around. Email would probably be more convenient for them and me, and a specific POC may be useful to other newbs as well. Any info would be greatly appreciated.

Kelly

[Drillboss]

I'd suggest that you start with an e-mail to one of the general information addresses listed on their website. The reply should come from an individual that you could continue working with.

[kpswihart]

Thanks, Drillboss. I tried the general info addresses on the AA website last week, hopefully I'll get a reply soon.

[Drillboss]

I've gotten responses from the technical address. That said, I don't get the impression that they are overstaffed.

[Grendel]

I got the follow from Joe Bob Outfitters since they just got stock in:

Anderson Stripped Upper
Spikes Melinite Gas Tube
Joe Bob's adjustable gas block
Forward assist
Ejection port door
Total = $114 to the door

Still looking at Bolts and Mags