Shooting an AR off the bench

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Rickc
    Warrior
    • Aug 2016
    • 311

    #16
    Originally posted by NugginFutz View Post
    I had the same issue with my PRS. I drilled and tapped a set screw into the bottom, aligned with a slot. No more sliding cover. If I ever need to go back to the monopod, it's a simple matter to loosen the screw and remove the cover.


    Really like that side charger. Did you happen to mention which chamber he used on that upper? I did not see it...
    6mm ar turbo 40 improved

    Comment

    • savagebob
      Unwashed
      • Jun 2017
      • 1

      #17
      I put a few drops of CA adhesive on my Magpul PRS stock lower rail cover piece so it doesn't slide off anymore. I can't use a rear monopod in AR Tactical Rifle class so that cover will never need to be removed. A setscrew or a countersunk flat head screw sounds like a great idea NugginFutz. I will try that on my other Gen I PRS.

      Comment

      Working...
      X