Originally posted by 85_Ranger4x4
View Post
CLOSED 65G 0.136 Bolt Buy A $55+S&H
Collapse
X
-
-
-
Originally posted by explorecaves View Posttreatment/coating.....semantics (and it does add some to the surface, albeit very minimally of between 5-25 um of thickness depending on time in the bath: http://www.burlingtoneng.com/wear_resistance.html ).... point of the post was to get data to verify these were built to spec since I have not seen anyone post up measurements.
I don't think the "short chamber" threads are even using the group buy bolts.
Comment
-
-
Yes, but I have seen several instances where the bolt face depth has had several mil difference between different manufacturer bolts. I do not recall if it has been stated this manufacturer has made grendel bolts before. Just a thought that it might be beneficial to find the problem earlier rather than later if there is one and send a large batch at once instead of several individual shipments. I am not expecting an issue as I am sure BFT has the bases covered but would easily be something that could be overlooked.
Comment
-
-
Installed one of the new bolts in my Faxon 16 and went out to the local woods this afternoon for some blasting. Few slow shots by me and then the kid did a mag dump with Wolf 100 FMJ. No hiccups, worked beautiful!:: 6.5 GRENDEL Deer and Targets :: 6mmARC Targets and Varmints and Deer :: 22 ARC Varmints and Targets
:: I Drank the Water :: Revelation 21:6 ::
Comment
-
-
Originally posted by tucansam View Post12" Faxon came, still waiting on bolt. Cracked the parts safe and realized I need a bolt carrier. What are you all using? Are there good deals out there on solid gear? Haven't bought a BCG separate in years.
Comment
-
-
took it to the range shot a box of wolf steel and some hand loads, hand loads were 28gr xbr with nosler 123 CC chronographed at ave 2200 out of the 12.5 inch barrel,wolf grouped about inch and a half at 50 yards handloads were a little under an inch was just running a milspec trigger and mostly function testing, all rounds chambered and fired and cycled the action but failed to lock the bolt back on an empty mag most of the time so probably a breaking issue as everything is new
on a side note one of the wolf steel case rounds cracked upon firing which was odd.... has anyone else experienced case failure with wolf steel this was my first time shooting itPunctuation is for the weak....
Comment
-
Comment