Howa 6.5 Grendel 20" HB barreled action.
MDT LSS chassis
MDT LSS fixed stock adaptor
Luth Ar MBA-1 stock
Warne 20 MOA base
MIL stock grip
Vortex 6 - 24 x 50 PST FFP mil/mil scope
Vortex 0.97" PMR rings (These are too high, swapping out for 0.87")
Harris bipod
Having a big issue with my cheek weld. As you can notice. I have the scope as far rearward as possible. To be the perfect distance from the scope my cheek is on the very front edge of the cheek weld, it is really only half on. I have a MAGPUL GEN 2 PRS stock in FDE and it looks like the cheek weld is a bit far further forward. I called MBT, LUTH AR and MAGPUL.
THE GEN 3 PRS STOCK's cheek riser is actually further rearward!
Will shoot it tomorrow.....
MDT LSS chassis
MDT LSS fixed stock adaptor
Luth Ar MBA-1 stock
Warne 20 MOA base
MIL stock grip
Vortex 6 - 24 x 50 PST FFP mil/mil scope
Vortex 0.97" PMR rings (These are too high, swapping out for 0.87")
Harris bipod
Having a big issue with my cheek weld. As you can notice. I have the scope as far rearward as possible. To be the perfect distance from the scope my cheek is on the very front edge of the cheek weld, it is really only half on. I have a MAGPUL GEN 2 PRS stock in FDE and it looks like the cheek weld is a bit far further forward. I called MBT, LUTH AR and MAGPUL.
THE GEN 3 PRS STOCK's cheek riser is actually further rearward!
Will shoot it tomorrow.....
Comment