Tweet
Anderson Lower from Cerro Forged lower. Same thing Colt uses
Hand-guard is Vector optics, 16.5 inch, with end-cap for .920 diameter barrel. Key-mod, with three rails. Two 5 inch, and 1 three inch.
20moa scope riser, under quick detach 30mm one piece scope mount, with a Neewer 6-25x56 scope. Scope is hard to get, and manufacturer only has one US distributor. But they work.
Harris style bi-pod mounted on a key-mod bi-pod stud that doesn't use you rails, and is rock solid.
Magpul MOE 6 position stock, on standard buffer tube kit.
Lower parts kit from Anderson, with 4.5 pound trigger. My local range requires no muzzle brake, and a 4.5 pound trigger in all ARs for safety reasons.
The barrel is where I went all out.
Krieger Varmatch barrel, 416r stainless, 26 inch, .936 gas journal, muzzle threaded 3/4-24tpi for a brake or suppressor. Includes stainless thread protector.
Gas block is a JP Enterprises type 8 .936 adjustable with stainless rifle length gas tube.
Bolt carrier group is a toolcraft from Cryptic Coatings, 6.5 Grendel bolt, with .125 head-space.
BCG, Gas block, and barrel alone are over 1k dollars for the parts. Plus the machine work to get maximum accuracy.
Rifle is worth 2k all day long, and is brand new. Never even fired this one.
I'll take 1500 for it by postal service money order, and ship to any FFL in your area.
Pictures
https://photos.app.goo.gl/Gj8v2A22JwFnANbr1https://photos.app.goo.gl/Gj8v2A22JwFnANbr1
Hand-guard is Vector optics, 16.5 inch, with end-cap for .920 diameter barrel. Key-mod, with three rails. Two 5 inch, and 1 three inch.
20moa scope riser, under quick detach 30mm one piece scope mount, with a Neewer 6-25x56 scope. Scope is hard to get, and manufacturer only has one US distributor. But they work.
Harris style bi-pod mounted on a key-mod bi-pod stud that doesn't use you rails, and is rock solid.
Magpul MOE 6 position stock, on standard buffer tube kit.
Lower parts kit from Anderson, with 4.5 pound trigger. My local range requires no muzzle brake, and a 4.5 pound trigger in all ARs for safety reasons.
The barrel is where I went all out.
Krieger Varmatch barrel, 416r stainless, 26 inch, .936 gas journal, muzzle threaded 3/4-24tpi for a brake or suppressor. Includes stainless thread protector.
Gas block is a JP Enterprises type 8 .936 adjustable with stainless rifle length gas tube.
Bolt carrier group is a toolcraft from Cryptic Coatings, 6.5 Grendel bolt, with .125 head-space.
BCG, Gas block, and barrel alone are over 1k dollars for the parts. Plus the machine work to get maximum accuracy.
Rifle is worth 2k all day long, and is brand new. Never even fired this one.
I'll take 1500 for it by postal service money order, and ship to any FFL in your area.
Pictures
https://photos.app.goo.gl/Gj8v2A22JwFnANbr1https://photos.app.goo.gl/Gj8v2A22JwFnANbr1