As the title describes I measured the distance to the lands with the 123 ELD in my LaRue barrel yesterday and it came out to 2.300". Anyone else measured theirs with this bullet? Makes me wonder if I should start loading around .020 off which is where my ELDs seem to like it in my bolt guns.
Just measured 123 ELD distance to lands in my LaRue
Collapse
X
-
If your mags can allow it and you don't end up pulling bullets after chambering with BCG inertia, go for it.
Work your ladder up with that COL though to see if it spikes on you any. I get higher mv with longer COL with the same charge weights.NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
-
-
Originally posted by LRRPF52 View PostIf your mags can allow it and you don't end up pulling bullets after chambering with BCG inertia, go for it.
Work your ladder up with that COL though to see if it spikes on you any. I get higher mv with longer COL with the same charge weights.
Comment
-
-
Originally posted by Kilco View PostI had a similar jump in my Odin Works barrel. However they shoot the light out at 2.255 so I never messed with it any further. I have solid data for the current loads, and once I find something thay works I'm hard pressed to try anything else.
Comment
-
Comment