Need a Thread Protector

[sawacs]

Having never used a thread protector I figured I would ask you guys before picking a couple up.

What would you fellas recommend for 5/8-24 threads? I have two barrels, ARP 18" 6.8 and an ARP 20" 6mm Predator (Grendel based), that I need something to protect the threads while working up loads. After the best loads are found, I plan on attaching the AAC flash hiders and switching to suppressed.

Any information, would be most appreciated,

Sawacs

[Joseph5]

Why not just put your flash hiders on now?

[sawacs]

Basically, I would like to test the barrels without any devices on the end to see if accuracy changes with the flash hiders. It is nothing more than a simple curiosity of mine.

Cheers!

[1075 tech]

https://www.midsouthshooterssupply.com/item/00114gthm247/muzzle-thread-protector-ar-10-and-point300-aac-blackout-58-24-x-point750

6 bucks. That's what I put on my last Grendel

[grayfox]

Look at your local gun store, there's one that ought to have some 5/8-24's, get the stainless ones... either white ss or blackened... I did that but also got a couple online. Midway, Midsouth, lots of choices. Haven't had any prob's with any of them. Don't need to torque the thread protectors IMO.

[sawacs]

Thank you all for the information.

I'll check those recommendations out and go from there.

Cheers!