Page 3 of 3 FirstFirst 123
Results 41 to 42 of 42

Thread: Broken Bolts?

  1. #41
    Chieftain NugginFutz's Avatar
    Join Date
    Aug 2013
    Location
    NRA Member, Rocky Mountain Area
    Posts
    1,872
    Quote Originally Posted by keystone183 View Post
    I think i have seen you post that before, with some pictures, but couldn't find it. You mind posting that again?
    I believe this was it...

    http://www.65grendel.com/forum/showt...ll=1#post77657
    When you earnestly believe you can compensate for a lack of skill by doubling your efforts, there's no end to what you can't do. ~ Larry Kersten

  2. #42
    Super Moderator LRRPF52's Avatar
    Join Date
    Sep 2014
    Location
    Utah
    Posts
    4,743
    Quote Originally Posted by NugginFutz View Post


    That's it.

    Just make sure to clean out all the lapping compound when you're done.

    Better to do it before final assembly with just your barrel in the upper held in place with the nut, nothing else.

    Strip down the bolt with a bolt disassembly tool, reassemble it with cam pin and firing pin, FPRP into the carrier, and cycle the action a bunch of times on a lower with a buffer and spring, no FCG.
    NRA Basic, Pistol, Rifle, Shotgun, RSO

    CCW, CQM, DM, Long Range Rifle Instructor

    6.5 Grendel Reloading Handbooks can be found here:

    www.AR15buildbox.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •