Making this decision has been, by far, the most difficult one for me - so I am asking for some help. I am wanting something that will trim/debur/chamfer all in one step, or in one station at least. I am reloading Grendel, Creedmoor, 556 and 10mm.
My initial plan had been to buy a Lyman Case Prep Xpress and use the 8/32 adapter for Lee case trimmers. This would allow me to trim/chamfer, ream/uniform primer pockets and lube in one station. Would this be okay?
I've also considered an RCBC Trim Pro with the RCBS 3 way trimmers. Considered that, but that puts primer reaming/uniforming in a separate step and I am having trouble finding 3 way cutters, in stock, for Grendel.
Also looked at a WFT trimmer, but it only trims.
I don't really want to spend the money on a Giraud. I know that's probably the best option, but I'm just not there yet.
My initial plan had been to buy a Lyman Case Prep Xpress and use the 8/32 adapter for Lee case trimmers. This would allow me to trim/chamfer, ream/uniform primer pockets and lube in one station. Would this be okay?
I've also considered an RCBC Trim Pro with the RCBS 3 way trimmers. Considered that, but that puts primer reaming/uniforming in a separate step and I am having trouble finding 3 way cutters, in stock, for Grendel.
Also looked at a WFT trimmer, but it only trims.
I don't really want to spend the money on a Giraud. I know that's probably the best option, but I'm just not there yet.
Comment