Results 1 to 3 of 3

Thread: Charging handle change worked out well

  1. #1
    Warrior wilecoyote's Avatar
    Join Date
    Jul 2013
    Location
    Ormond Beach, FL
    Posts
    132

    Charging handle change worked out well

    My Grendel has an optic with a large tube (Steiner 3-12x50 w/34mm tube). When mounted even with a cantilever mount, the charging handle is well covered and charging is not as easy as usual. This was even the case with the AXTS Raptor that I had installed on it.

    Part of a deal I made not long ago included a BCM Mod 4 charging handle. While I didn't need another, I thought I could give it a try like everything else. Glad I did. The longer latch is out far enough to make charging much easier. A pull from the side and no issue whatsoever. I'm really liking it. Have to get a range trip in, but if function and dry fire tests hold true that is staying where it is.

    Just some info that may help anyone running into a similar issue.
    Every cloud has a silver lining (except for the mushroom shaped ones… which have a lining of Iridium and Strontium 90)

  2. #2
    Warrior
    Join Date
    Mar 2017
    Location
    SE Pa
    Posts
    842

  3. #3
    Warrior wilecoyote's Avatar
    Join Date
    Jul 2013
    Location
    Ormond Beach, FL
    Posts
    132
    Quote Originally Posted by bj139 View Post
    Interesting... May have to try one sometime. Thank you.
    Every cloud has a silver lining (except for the mushroom shaped ones… which have a lining of Iridium and Strontium 90)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •