That's pretty much what I did to mine.
Must be rough shooting all day on a Monday. I'll try it after modifying the extrcactor.
Btw how is your's grouping?
It is spring break!!! Monday was all load development and fire forming brass, so i wasn't looking for groups, but with wolf 120 MPT it groups quite well!!
the two holes at the lower right are the first shots after bore sighting my scope @ 50 yds, the top left was an over correction, I finished off the last of my Wolf sp ammo with that group. I then adjusted the windage to the left and shot the MPT group.
Last edited by Bwild97; 03-27-2012 at 05:29 PM.
I had problems with ejection of fired cases, and traced it back to an over powerful extractor spring. The extractor would push the case onto the opposite side of the bolt with such force that the ejector spring couldn't push it out of the recess in the bolt fast enough. I got funny ejection, stovepipes, and all sorts of odd things happening. As soon as I put in a weaker extractor spring, everything started working just like normal... Fired cases started dropping at the 4-5 o'clock position, about 6 feet from the ejection port after I put in a weaker extractor spring.