SAAMI accepted the 6.5 Grendel as a standard cartridge!
(Bill Alexander of Alexander Arms relinquished its trademark status & opened the cartridge to industry development.) From page 20 of the [book of the AR-15] by Guns & Ammo. on the gun rag stands as we speak.
Hornady submitted the the cartridge as designed by Alexander to SAMMI and they accepted it. YAHOO!
Hopfully everybody will start making 6.5 Grendel barrels now. I know what my next build will be! Now do I choose an 18 or 20 inch bbl?
Welcome! This was posted about 7 months ago:
http://www.65grendel.com/forum/showt...ighlight=SAAMI
Glad to have you on board!
"The root cause is not that islam has a fundamentally flawed ideology with violence and degradation for all those overcome by its ravenous doctrine or the intended spread of its evil dominance in ever increasing areas but that there is a spiritual battle that is being waged between good and evil."
Von Gruff
Glade to be aboard. I guess that G&A is a bit slow on printing the story.
It's basically a lead time issue. Those AR15 mags are worked on for about 6 months or so before they hit the stands.Originally Posted by DHumbarger
But, we're glad to have the new member! Be sure to post when you get your rifle built!
"The root cause is not that islam has a fundamentally flawed ideology with violence and degradation for all those overcome by its ravenous doctrine or the intended spread of its evil dominance in ever increasing areas but that there is a spiritual battle that is being waged between good and evil."
Von Gruff
Welcome. Most influential people in the firearms industry that I spoke with at this year's (2012) SHOT were still under the impression that Bill A. was trying to keep the cartridge away from everyone else, and hadn't even heard that it was SAAMI-approved. This included executives from the "Freedom Group", R&D people for CZ, DSA, Knight's MFG, etc.
welcome to the horde. yea, i read an article about the .17 hornet at least 4 months after my uncle told me about it! like bwaites said, its a lead time issue with the mags.
Thanks for the welcome folks. The more that I study the grendel the more intriging/confusing it becomes. I have built several 6.5 Grendel bolt guns on the little CZ 527 actions. They all shot sub MOA groups. Lothar Walther sells SS barrels threaded & chambered for the little CZ. Just need to headspace to the action.
Set me straight. Surfing the net for grendel info I ran into info on the 264 lbc. Is this thing just a Grendel with a tighter neck (.295 vs .300) & different throat angle? Please someone untangle this web.
Last edited by DHumbarger; 05-26-2012 at 02:19 PM.
yes, the 264 LBC lacks the compound throat angle of the grendel, and a small neck. It is supposedly tailored to the 123 A max. I cant say that for sure as Ive not seen much data on it
But the one thing the article may do is raise awareness of the cartridge to the masses, and build more momentum that is definitely in our favor. Even late news can get the ball rolling.
Especially if the industry execs get their news from G&A.
Posting Permissions
Reply With Quote