Ramshot X-Terminator

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • XcountryRider

    Ramshot X-Terminator

    The local reloading shop had some Ramshot Terminator in stock so i picked up a pound to experiment with. Anyone have some load data to share? A first look it appears to take less powder to get the job done than say AA2520. Would the less powder per load requirement make it a candidate for 129gr and 140gr pills? When you compare loads it looks like it takes 2 grains less per load compared to AA2520.

    Ramshot X-Terminator
    6.5 Grendel (For AR-15 Style Weapons)
    Barrel: 20" ■ Twist: 1-10" ■ Primer: WIN WSR ■ Bullet Diameter .264"
    85 SIE HP 28.9 2,702 32.1 2,980 52,000 2.150
    95 HDY V-MAX 27.5 2,588 30.8 2,831 51,980 2.190
    100 NOS B-TIP 26.7 2,464 29.7 2,709 51,920 2.230
    107 SIE HPBT 26.3 2,389 29.2 2,649 51,000 2.260
    120 SIE HPBT 25.1 2,233 27.9 2,466 51,970 2.260

    Accurate 2520
    Last edited by Guest; 10-08-2013, 03:27 AM.

  • #2
    It's a faster-burning powder, if you look at a burn rate chart. It's well-suited to lightweight/short bullets, not long/heavy projectiles. You would hit pressures too soon with the long/heavier pills before getting any decent velocity.

    On the old forum, guys liked it for predator loads pushing the lightweight bullets under 100gr.

    Comment

    • XcountryRider

      #3
      I'll use it for 100gr Amax and 100gr Nosler BT and Vmax then.

      Comment


      • #4
        I think those are good projectiles for it. I'm not sure how well it drives the gas system. Looking forward to your results. Just work the load up per Ramshot's posted start loads.

        Comment

        • bwaites
          Moderator
          • Mar 2011
          • 4445

          #5
          I've shot a lot of 100 grain Btips with it with great success accuracy wise. Good velocity.

          Its a little too fast for anything over 107-110 in my experience.

          Comment

          • NugginFutz
            Chieftain
            • Aug 2013
            • 2622

            #6
            +1 on it being a little too fast for the heavier pills. In the .223 world, where my experience with X-terminator is, it is suitable for 55 gr and less. Heavier than that, Ramshot recommends TAC.
            If it's true that we are here to help others, then what exactly are the others here for?

            Comment


            • #7
              Just in case you guys didn't know, Ramshot X-T and AA 2230 are identical powders and load data is interchangeable. They have been the same powder since 2007.

              Comment

              • NugginFutz
                Chieftain
                • Aug 2013
                • 2622

                #8
                Originally posted by mseric View Post
                Just in case you guys didn't know, Ramshot X-T and AA 2230 are identical powders and load data is interchangeable. They have been the same powder since 2007.
                Right, and their load data recommends 2230 for 6.5G pills 120 gr or less, much the same as the OP's X-Terminator data shows.
                If it's true that we are here to help others, then what exactly are the others here for?

                Comment

                • sneaky one
                  Chieftain
                  • Mar 2011
                  • 3077

                  #9
                  X term is best for under 100 gr. pills.
                  Yup 2230 & x-term are same as-since.
                  I did a much of my Gmx testing in -2010-w/ x term.
                  Then came -8208-cfe 223-.

                  If all you have is a certain powder , it can be fine it can be utilized .
                  Blade used it -xterm for his recently sold 45-70-for the last 2 yrs.
                  Last edited by sneaky one; 10-09-2013, 02:27 AM.

                  Comment

                  • shooter545
                    Warrior
                    • Aug 2012
                    • 249

                    #10
                    I did some loading with it and got 1.5" groups with it so not too impressed. Tried it again later with lighter bullets, 107gr SMK & 108gr Lapua, and got multiple sub 1" groups. I have used it for years in .223 and love Ramshot powders in general. I have some 100gr AMAXs that I want to use it with but work has been keeping really busy.

                    Comment

                    • XcountryRider

                      #11
                      I'll try it with 100gr barnes TSX.

                      Comment

                      • sneaky one
                        Chieftain
                        • Mar 2011
                        • 3077

                        #12
                        I ended up with 28.8 x-term, over a 100TTSX , and my 95 gr. GMX. Both were half inch groups @ 100y.

                        Comment

                        • XcountryRider

                          #13
                          Wait theirs a 95gr GMX?

                          Comment


                          • #14
                            yes and no. No for you and I, Yes for Mr Sneaky. He cuts them down on a lathe to feed his "Wild Side".

                            Comment

                            • mdewitt71
                              Warrior
                              • Dec 2016
                              • 681

                              #15
                              I have 8 lbs of Ramshot X-Terminator....... loaded some .223 loads with it already but, will have to try it out with some 6.5 Grendel.
                              I got it for a steal of a price so I need to experiment with it and see if I can get some good recipes.
                              ― George Orwell

                              Comment

                              Working...
                              X