+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17

Thread: Ammo Boxes

Hybrid View

  1. #1

    Ammo Boxes

    Anyone know of any plastic ammo boxes made specifically for 6.5 Grendel.

  2. #2
    Bloodstained
    Join Date
    May 2011
    Posts
    88
    I've got some. I'll have to look what they are when I get home.

  3. #3
    The Frankford Arsenal 512 boxes fit the 6.5G well.

  4. #4

    Ammo boxes for the 65G

    the boxes made by Frankford Arsenal (MidwayUSA) and the ones made by J&J will not survive a 3' drop, on a corner, onto a concrete surface while fully loaded.

    get the MTM boxes.

  5. #5
    Quote Originally Posted by penumbra View Post
    the boxes made by Frankford Arsenal (MidwayUSA) and the ones made by J&J will not survive a 3' drop, on a corner, onto a concrete surface while fully loaded.

    get the MTM boxes.
    True for sure. Yet they fit in a well in a 30 cal ammo can, the MTM ones do not. I have both, and end up using the Frankford ones the most.

    But the MTM's are clearly made better!

  6. #6
    Bloodstained
    Join Date
    May 2011
    Posts
    88
    Quote Originally Posted by Inferno333 View Post
    The Frankford Arsenal 512 boxes fit the 6.5G well.
    Yep. That's the ones I've got.

  7. #7
    The MTM J-20-M- work well (they are made for 7.62x39) but they shake a little and the cases will come out of the slot if they are empty. The case is just a little too long for the Grendel. I am going ot run the top and the bottom through the table saw and trim them to make the perfect plastic case for teh 6.5 Grendel.

    http://www.mtmcase-gard.com/products...ifle-j-20.html

  8. #8
    Bloodstained Gswamp's Avatar
    Join Date
    May 2011
    Location
    TX
    Posts
    41
    I use the MTM boxes but I wanted a box that would hold 50 rounds.

    I found THESE

    I was gonna order a couple but shipping was too much to make it worthwhile.

  9. #9
    Quote Originally Posted by Gswamp View Post
    I use the MTM boxes but I wanted a box that would hold 50 rounds.

    I found THESE

    I was gonna order a couple but shipping was too much to make it worthwhile.
    Those very boxes have been discussed on the old forum. They are not made specifically for the Grendel. They are very thin and empty brass comes out of the individual slots if you invert the box.

  10. #10
    Quote Originally Posted by Gswamp View Post
    I use the MTM boxes but I wanted a box that would hold 50 rounds.

    I found THESE

    I was gonna order a couple but shipping was too much to make it worthwhile.
    Those are made by Berry's. The one in the picture is model#409. The 109 also will fit the grendel. It looks like soemone is just putting a grendel sticker on the Berry's box. The 409 box is made to fit all sorts of ammo.....7.62x39, 22-250, .308, etc.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts