Hey, I just got my first broken case ( 6.5 G.) stuck in the chamber. I don't have any broken shell extractor tools. I have tried different easy-out/reamers that fit, being very careful, but nothing can get a grip. Any ideas out there to try. Thanks, Dave.
broken case extraction
Collapse
X
-
Trick is to use one slightly oversized for the bore. Enough that it pushes the bristles backwards about 45 degrees. It was either 7mm or 30 cal that worked perfect for me.
Push it into the bore from the chamber end, then pull back
The bristle tips push against the neck rim, plenty of engagement. Does not take inserting it far, with mine just about 1/2 into the bore was enough.
Comment
-
Comment