Here's a rifle I did using a Lilja 22" fluted barrel, AA hard use bolt, with Seekins billet set and handguard. I installed a JP single-stage trigger in it, and it has the JP Silent Captured Spring recoil system.
I did some custom work under the hood on the barrel extension to ensure brass is treated well, and large meplat hollow points won't get hung up in the rare fast cyclic rate condition.
Metal parts are finished in NIC Industries H-Series Cerakote, FDE. Barrel is Graphite Black Cerakote, with a semi-gloss finish.
At the range 2 weeks ago, PDS and I met up to shoot it, and I rapid-fired this group, with him as a witness in the spotting scope. My first round is the one on the left. The other 4 are in the ragged hole to the right. This is factory Hornady 123gr, but we can't remember if it was the A-MAX or SST that was used for this group, as we had boxes of both.
.642" - .264" = .378" 5 rounds rapid (.361 MOA)
Here are some of his 107gr SMK hand loads that he shot slow fire:
.616" - .264" = .352" (.336 MOA )
Here's a group he shot recently with the 123gr A-MAX:
I did some custom work under the hood on the barrel extension to ensure brass is treated well, and large meplat hollow points won't get hung up in the rare fast cyclic rate condition.
Metal parts are finished in NIC Industries H-Series Cerakote, FDE. Barrel is Graphite Black Cerakote, with a semi-gloss finish.
At the range 2 weeks ago, PDS and I met up to shoot it, and I rapid-fired this group, with him as a witness in the spotting scope. My first round is the one on the left. The other 4 are in the ragged hole to the right. This is factory Hornady 123gr, but we can't remember if it was the A-MAX or SST that was used for this group, as we had boxes of both.
.642" - .264" = .378" 5 rounds rapid (.361 MOA)
Here are some of his 107gr SMK hand loads that he shot slow fire:
.616" - .264" = .352" (.336 MOA )
Here's a group he shot recently with the 123gr A-MAX:
Comment