+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Bolt Actions & Single Shots (https://65grendel.com/forumdisplay.php?fid=17)
+--- Thread: Howa Mini Action 6.5 Grendel Accuracy (/showthread.php?tid=17336)
Howa Mini Action 6.5 Grendel Accuracy - HokeyPokeyKid - 11-23-2018
I like the Boyds pro varmint, how well did it fit? Did you have to do any fitting, did you bed it?
Howa Mini Action 6.5 Grendel Accuracy - drewsbow - 11-24-2018
I thought it fit really well , no fitting needed and didn't bed as it leaves a free float gap on mine .
Howa Mini Action 6.5 Grendel Accuracy - pinetreebbs - 11-25-2018
drewsbow Wrote:I thought it fit really well , no fitting needed and didn't bed as it leaves a free float gap on mine .
My experience too.
Howa Mini Action 6.5 Grendel Accuracy - HokeyPokeyKid - 11-25-2018
Thats good to know, I was thinking about one for my second Howa grendel build.
Howa Mini Action 6.5 Grendel Accuracy - singleshotfan - 11-25-2018
HokeyPokeyKid Wrote:Thats good to know, I was thinking about one for my second Howa grendel build.
Just installed new action is same stock. All fit well except the DIP bottom metal. Won't strip the last round, sometimes 2 rounds out of the mag.
Thinking I will have to inlet the metal deeper so the rounds will strip out as designed.
Howa Mini Action 6.5 Grendel Accuracy - Sticks - 11-26-2018
Welcome to the Horde.
I had heard that Boyds fixed their milling for the Howa bottom plate, but would not hurt to check. Pull your action screws out and just put finger pressure on the rear, then just the front, and see if the opposite side lifts off the stock.
http://www.65grendel.com/forum/showthread.php?15570-Fitting-Howa-Mini-1500-barreled-actions-into-after-market-stocks&highlight=fitting
Howa Mini Action 6.5 Grendel Accuracy - Kswhitetails - 11-26-2018
Boyd's did indeed fix the bottom inlet. No play with the DIP BM for me, and feeds correctly. Something is awry I'd bet.
Howa Mini Action 6.5 Grendel Accuracy - Frontier Gear - 11-26-2018
My two Boyds stocks had the angle corrected. I did find though that I had to remove a slight amount of wood from both the front and the back action bolt areas to get the feeding reliable. I actually made pillars first that would feed 100% reliably. Then I removed the wood so that they were the same measurement (or less) as the pillars before epoxying the pillars in place.
Howa Mini Action 6.5 Grendel Accuracy - singleshotfan - 11-26-2018
Good info. Will work on the BM fit this week. Start with removing fasteners and check the fit.
Howa Mini Action 6.5 Grendel Accuracy - HokeyPokeyKid - 11-26-2018
Frontier Gear Wrote:My two Boyds stocks had the angle corrected. I did find though that I had to remove a slight amount of wood from both the front and the back action bolt areas to get the feeding reliable. I actually made pillars first that would feed 100% reliably. Then I removed the wood so that they were the same measurement (or less) as the pillars before epoxying the pillars in place.
Making the pillars first is a great idea and it would definitely show any deficiencies in stock fit immediately.
Howa Mini Action 6.5 Grendel Accuracy - Frontier Gear - 11-27-2018
My assumption was that Boyds left a little extra "meat" on there just to make up for potential variances. They do state that these are not 100% inletted stocks, and I would rather have a little extra material to play with. So I was pleased with their product. It was all I could do to keep myself from taking advantage of Boyd's and Brownell's black Friday deals. There was almost a 300 win mag barreled action and a Boyds Classic stock coming my way this weekend.
Howa Mini Action 6.5 Grendel Accuracy - drewsbow - 11-30-2018
[ATTACH=CONFIG]13264[/ATTACH][ATTACH=CONFIG]13265[/ATTACH]
This was after my brake install today
Howa Mini Action 6.5 Grendel Accuracy - roor - 12-01-2018
Congrats on that shooting and I have to be that guy but 3 round group is a little small. How's the brake on it? That's probably the last thing I need to complete the build
Howa Mini Action 6.5 Grendel Accuracy - drewsbow - 12-01-2018
I like the brake so far SureFire brand and lets me stay on target through the scope after the shot not that the Grendel needs a brake but what the heck.
I am only hunting with it so a three shot group is fine with me :-)
Howa Mini Action 6.5 Grendel Accuracy - drewsbow - 12-08-2018
I decided to load some 123 gr sst since everyone is getting good results with them and a 5 shot group since 3 is "too small" :-)[ATTACH=CONFIG]13308[/ATTACH][ATTACH=CONFIG]13309[/ATTACH]
Howa Mini Action 6.5 Grendel Accuracy - drewsbow - 12-08-2018
Load was 123 gr SSt over 28.6 gr of 8208 xbr with Rem 7 1/2 primer loaded to 2.321
Howa Mini Action 6.5 Grendel Accuracy - klipsh - 12-11-2018
Aknv Wrote:Just trying to get a general consensus on the factory barrel performance. I own a Howa chambered in 6.5 Grendel (non threaded barrel / HTI factory stock version )and have been some what disappointed with the shot group. I think have tried just about every factory load I can get my hands on and the best it does is 1.5” @ 100 yards. Does this seem normal for this rifle ?
I have the Howa Mini in 6.5 Grendel. I put (bedded) her into a Boyd's AT1 stock, and with a little more attention to the fundamentals than I have to do with my Tikka (creedmoor), I was able to get under 1/2 MOA. I just relocated the barreled action into an MDT LSS chassis and am hoping to see a little improvement, or at least more consistent tight-groupings.
This is using the Hornady Black Match ammo
Pics of targets are on my Instagram account user: gun_hobbies #project_howa
My barrel is the threaded Heavy barrel, fyi.
Howa Mini Action 6.5 Grendel Accuracy - Rebels010 - 12-11-2018
klipsh Wrote:I have the Howa Mini in 6.5 Grendel. I put (bedded) her into a Boyd's AT1 stock, and with a little more attention to the fundamentals than I have to do with my Tikka (creedmoor), I was able to get under 1/2 MOA. I just relocated the barreled action into an MDT LSS chassis and am hoping to see a little improvement, or at least more consistent tight-groupings.
This is using the Hornady Black Match ammo
Pics of targets are on my Instagram account user: gun_hobbies #project_howa
My barrel is the threaded Heavy barrel, fyi.
I'm considering replacing my boyds stock with a chassis so I'm interested to hear your results.
Howa Mini Action 6.5 Grendel Accuracy - A5BLASTER - 12-11-2018
First 5 rounds down pipe on my howa grendel 20 inch threaded heavy barrel, boyd's pro varmint.
Pulled the last 2 shots. Hornady black ammo.
Howa Mini Action 6.5 Grendel Accuracy - Taz575 - 12-11-2018
My howa likes the BRN-1 MDT chassis from Brownells. 123 SST handloads, different seating depths from the chassis. It didn't care for factory loads and is a bit picky with handloads, too, but most of those have been run with the factory stock and a lower power scope. [ATTACH=CONFIG]13324[/ATTACH]