+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Photo Gallery (https://65grendel.com/forumdisplay.php?fid=16)
+--- Thread: Build in TN (/showthread.php?tid=16651)
Build in TN - CastAway - 07-18-2018
First picture on the forum. Hope it works.
Picking a trigger and stock. Would like the JP silent capture, but am still researching. Its an 18 Odin Works barrel, intermediate gas length (11-12). Torn between the Odin Zulu 2.0 and the DD butt stock.
https://farm2.staticflickr.com/1766/29615600608_dd7443f781_c.jpg
https://farm2.staticflickr.com/1762/42582140115_aa18d3c704_c.jpg
Build in TN - BCHunter - 07-18-2018
That is not your everyday ar, looking forward to seeing how you finish it.
Build in TN - rc51crazy - 07-18-2018
UT Orange..now that is a nice AR....
Build in TN - CastAway - 07-19-2018
Thanks guys, sincerely. On one hand I didnt want it to blend in, on the other, shiny is pretty counter intuitive. Still torn on it. Love those Seekins curves though.
Build in TN - Kswhitetails - 07-19-2018
I love the unique rifle that sticks out in the crowd. You have good eyes, that looks really snazzy. I personally don't care much for the "normalcy camouflage" of all black, but at the same time, it does have some classic appeal. All of my built ar's have a bit of mixed FDE/black so they are all mine/easy to identify in a crowd. I like your progress so far, list your build when done, will ya?
Build in TN - CastAway - 07-19-2018
You bet KS! (My wifes from the Clay Center area, Green Ks)
Build in TN - Kswhitetails - 07-20-2018
AYE AYE! Been all around there on my KLR 650 years ago. Beautiful country!
Build in TN - CastAway - 07-31-2018
Compromised on a DD stock. Stuck to my guns (badabing) and bought the Elftmann trigger and Cryptic Coatings BCG though!
https://flic.kr/p/28yXUa3
Build in TN - Kswhitetails - 07-31-2018
Only thing that could make that better would be to color match the stock and trigger to the rest of the orange. Otherwise, looks good. Progress!
Build in TN - Dandynosler1 - 08-10-2018
Love the seekins/odin combo! Looks like they were made for each other.
Build in TN - CastAway - 08-10-2018
https://youtu.be/A4Lw2CXzOzI
Odin Works 18 1:8 DMR barrel, O2 Lite 15.5 rail; adjustable clamp-on gas block w/intermediate length gas tube. Odin Works billet upper - no forward assist. Odin Works ambidextrous safety. Seekins SP223 Gen2 billet lower w/ambidextrous bolt release. Ergo Deluxe Tactical grip. ATI buffer tube, buffer & spring. Daniels Defense butt stock. Elftmann 3-gun trigger with JP anti-walk pins. Odin Works XMR magazine release. My Cryptic Coatings Mystic Silver BCG is on back Order. Id like to have the Vortek Razor HD Gen2 w/mrad recticle and Thunder Beast Arms Ultra 7 suppressor one day. I may settle for the 1x6 from Primary Arms though.
Build in TN - VASCAR2 - 08-10-2018
Looks great and I bet it shoots good!
Build in TN - RMiller - 08-12-2018
Looks great.
Build in TN - bj139 - 08-12-2018
Orange you glad you built one in orange?
Build in TN - CastAway - 09-05-2018
Motivated by a day at the range with family, I found a reputable local smith who competes himself and builds custom ARs for accuracy. I dropped my upper off today to have the barrel mounted; lapped, friction fit and seated with 620. Excited to break it in soon! Have done some color fill for giggles.
https://flic.kr/p/2aMV7Vn
Build in TN - Grumpy - 09-13-2018
Kswhitetails Wrote:Only thing that could make that better would be to color match the stock and trigger to the rest of the orange. Otherwise, looks good. Progress!
Best be careful with the orange, burnt orange would be OK. Penitentiary orange and it'll never run on Saturdays.
...roll Tide.
Build in TN - CastAway - 09-19-2018
First shots today! Shes learning to be a gun now, instead of a bunch of metal parts. Couldnt wait, and shot without sights. Ten rounds, cleaning the barrel between each. First four didnt eject and the fifth was a partial before I found the sweet spot. I gave it half a turn more for good measure. The rest of a box cycled smooth. Love the adjustable gas block. Cant wait to actually sight it in.
My gunsmith told me that the potential for accuracy improves as the gun wears in. Hadnt heard that before. I would have figured the opposite was true.
Build in TN - bj139 - 09-19-2018
CastAway Wrote:Motivated by a day at the range with family, I found a reputable local smith who competes himself and builds custom AR’s for accuracy. I dropped my upper off today to have the barrel mounted; lapped, friction fit and seated with 620. Excited to break it in soon! Have done some color fill for giggles.
https://flic.kr/p/2aMV7Vn
You can embed your photo from Flickr by clicking on it in photstream. There will be a share arrow on the bottom right.
Click on it and copy and pasted the text into your post. I delete all the extra test after I preview the post.
Your barrel should get a bit more precise as fired rounds lap the barrel.
Build in TN - CastAway - 09-26-2018
Testing
Build in TN - Kswhitetails - 09-26-2018
Error: No file selected... lol