+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Photo Gallery (https://65grendel.com/forumdisplay.php?fid=16)
+--- Thread: Fixed my .224 Valkyrie Upper... (/showthread.php?tid=19100)
Fixed my .224 Valkyrie Upper... - Snarf - 06-08-2019
...by installing a 16" Faxon 6.5 Grendel Barrel
[ATTACH=CONFIG]14341[/ATTACH]
Bedded the barrel to the upper and gas block (fun fact, this Faxon barrel does not have the set screw dimples I've become accustomed to. Not a huge problem). New York only allows unthreaded barrels so the thread protector is also installed with Permatex. That is not the method they proscribe but I challenge anyone to get that sucker off of there without heat.
Shot some ladders with 123 ELD's, here's what I found at the end of one
[ATTACH=CONFIG]14342[/ATTACH]
28.5 gr Varget gave me 2360 fps, 13.2 SD. The flier shot was partly me and partly a velocity outlier as well
Fixed my .224 Valkyrie Upper... - 6.5Geo - 06-08-2019
Very nice rig. What issues did you have with the Val barrel?
Fixed my .224 Valkyrie Upper... - Snarf - 06-08-2019
6.5Geo Wrote:...What issues did you have with the Val barrel?
It was chambered in .224 Valkyrie that was the main issue I had. For a <$400 PSA upper it shot very well, sometimes sub-MOA with the $13 American Eagle. But I wanted bigger holes and smaller guns and within a week of getting into Grendel I had basically decided to ditch that caliber. Shooting a 75- 85 grain bullet at 3K fps is not that interesting to me, and the heavier bullets had problems from what I understood. Plus that it would not be good at killing things, I wouldn't feel right shooting a deer with any .22 caliber (even though I know for a fact any of them will work)