+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Photo Gallery (https://65grendel.com/forumdisplay.php?fid=16)
+--- Thread: 12.5 grendel just born tonight and ready to get some (/showthread.php?tid=20198)
12.5 grendel just born tonight and ready to get some - A5BLASTER - 12-18-2019
Best I could do for a pic gents but here she is.
Anderson lower
Anderson lower parts kit
Ssa-e trigger
Ratchet lok end plate/castle nut
Sba4 brace
Aero m4e1 upper
Aero 7 inch s-one handguard
Leupold mark ar mount
Vortex gen 2 pst 1-6
Rtba lowmass bcg
PF bolt
Wojetck adjustable .750 gas block
Standard a2 grip (favorite)
Kaw? Flash can thing amagigg muzzle device
Magpul polymer trigger guard
Standard carbine buffer and spring
Rocking cpd grendel mags.
When nfa gets their budget six8 recivers online it will be rebuilt on them and then I will put a sbr stamp on it.
Can't wait to hit the range saturday.
Edit to add.
Barrel is a Criterion are however you spell it from Mark at PF.
12.5 grendel just born tonight and ready to get some - Redomen - 12-18-2019
Very nice. What barrel?
12.5 grendel just born tonight and ready to get some - BluntForceTrauma - 12-18-2019
Gonna be a lot of fun!
12.5 grendel just born tonight and ready to get some - danm - 12-18-2019
In for range report!
12.5 grendel just born tonight and ready to get some - Rangerofthenorth - 12-18-2019
Looks good! How's the cheek weld on the SBA4 compared to the SBA3?
12.5 grendel just born tonight and ready to get some - A5BLASTER - 12-18-2019
Rangerofthenorth Wrote:Looks good! How's the cheek weld on the SBA4 compared to the SBA3?
Much better. I hated the sba3. Honestly don't really like the sba4 either, bit it does have a good cheek weld.
12.5 grendel just born tonight and ready to get some - Rangerofthenorth - 12-18-2019
A5BLASTER Wrote:Much better. I hated the sba3. Honestly don't really like the sba4 either, bit it does have a good cheek weld.Good to hear, I also don't care for the cheek weld on the SBA3, especially with my 1.93" mount.What are the other problems with the SBA4, loose fit?
12.5 grendel just born tonight and ready to get some - Bigs28 - 12-18-2019
Very cool.
12.5 grendel just born tonight and ready to get some - A5BLASTER - 12-18-2019
Rangerofthenorth Wrote:Good to hear, I also don't care for the cheek weld on the SBA3, especially with my 1.93" mount.What are the other problems with the SBA4, loose fit?
It's not real loose at all. But I'm just not much on adjustable braces/srocks. Like my fixed Moe stocks or a2/a1 stocks.
It's surprising more stiff then the sba3 and holds firm in the shoulder pocket.
But it isn't nor ever will be as good as a stock. But for the time being it will work good enough till I can get everything how I want it.
12.5 grendel just born tonight and ready to get some - A5BLASTER - 12-18-2019
Bigs28 Wrote:Very cool.
Thank you sir. Barrels a lil porker. So I will send it back to Mark this summer to be reporfiled too a much slimmer/trim fighting weight. Probably have him take the gas block size down from .750 to .625 as well.
12.5 grendel just born tonight and ready to get some - Lastrites - 12-18-2019
Well done.
12.5 grendel just born tonight and ready to get some - A5BLASTER - 12-22-2019
Well first range trip was a complete success.
Got her gas dialed in with 100 grain wolf. Then sighted in at 50 with 120 grain fusion. Then moved over to the 100 yard target.
Pics are from the 100 yard stand.
1-6 viper pst gen2 is the scope. Pistol bagged front and rear.
Both groups are 5 rounds and cold bore between each round.
12.5 grendel just born tonight and ready to get some - The Jerry Punto - 12-22-2019
Nice shooting A5! I'm assuming those are 1" squares. I'm looking at picking up one of those precision firearms barrels in a 11.5" configuration with matching bolt. It says .5 moa guaranteed, by the looks of those groups of yours it seems very feasible!
12.5 grendel just born tonight and ready to get some - A5BLASTER - 12-22-2019
The Jerry Punto Wrote:Nice shooting A5! I'm assuming those are 1" squares. I'm looking at picking up one of those precision firearms barrels in a 11.5" configuration with matching bolt. It says .5 moa guaranteed, by the looks of those groups of yours it seems very feasible!
Yes sir 1 inch squares.
12.5 grendel just born tonight and ready to get some - The Jerry Punto - 12-22-2019
A5, did you do anything special to the upper when building like truing up the face or bedding the barrel?
12.5 grendel just born tonight and ready to get some - A5BLASTER - 12-22-2019
The Jerry Punto Wrote:A5, did you do anything special to the upper when building like truing up the face or bedding the barrel?
Yes. I lapped the reciver face and did a compression fit bedding with steel shim stock that you can get in a roll.
Bedded the gas tube into the gas block, blocked the gas tube roll pin up so gas couldn't leak through it and hand cycled the action while soaking wet bout 300 times.
Do this to all my ar grendels.
12.5 grendel just born tonight and ready to get some - The Jerry Punto - 12-22-2019
A5, how does thermo fit compare to compression fit bedding? is it basically the same concept. also how are you bedding the gas tube?
12.5 grendel just born tonight and ready to get some - A5BLASTER - 12-22-2019
The Jerry Punto Wrote:A5, how does thermo fit compare to compression fit bedding? is it basically the same concept. also how are you bedding the gas tube?
Thermos fitting is how I get a compression fit.
When I find the correct thickness of shim stock that is just thick enough to keep the barrel from installing into the upper. I then do the heat and freeze thing and that allows it to install.
Once it returns to normal temp it's a super stiff and secure fit, basicly to get the barrel back out I have to drive it out with a wooden dowl inserted from the back of the upper and driven with a hammer.
I use to use locktite to build up a layer so the gas couldn't escape but lately I have been useing grollia glue gel super glue. Tends to last longer then the locktite.
All it does is hold back any gas that could escape from those spots until the carbon builds up and creates a carbon plug.
I put a ring around the gas tube where it comes out the gas block and I also cover each side of the gas tube roll pin (after it's installed)
I let it sit over night and then install the completed gas tube/block assembly onto the barrel.
You would be amazed how much gas comes out those lil spots.
And the glue isn't strong enough to lock up anything that you don't want it too.
12.5 grendel just born tonight and ready to get some - The Jerry Punto - 12-22-2019
Ok A5, I'll give that a try on my next build. Thanks!
12.5 grendel just born tonight and ready to get some - Lastrites - 12-23-2019
A drop or two of Acetone would break down any super glue if an issue were to present itself as well. Looks like it holds some real promise in the days coming.