+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Target & Competition Shooting (https://65grendel.com/forumdisplay.php?fid=12)
+--- Thread: Help! Looking for this target (/showthread.php?tid=21610)
Pages:
1
2
Help! Looking for this target - biodsl - 07-11-2020
I was at my range a couple of days ago and found this target on a backer at one of the rifle ranges. My Google-fu is weak; I can't seem to find this for sale anywhere or find a .pdf of the target. It's a 6" bullseye on 8.5 x 11 inch paper. It has data fields on the bottom for recording shot data. It might be a Border Patrol or Homeland Security target but there is no identifying form number on it. Does anyone know where I could get this target?
[ATTACH=CONFIG]16437[/ATTACH]
Help! Looking for this target - mdram - 07-11-2020
cant find it, but i can make something close if you like
Help! Looking for this target - biodsl - 07-11-2020
That would be great. What caught my eye was the white 3" bulleye. It's so much easier to hits on white than on black. Secondly, I like the fact that it's on 8.5 by 11 paper. Easy target storage for reference. Lastly the data fields are nice.
Help! Looking for this target - mdram - 07-11-2020
see if this works
i have it in autocad now, so i can tweek it if you like
Help! Looking for this target - Lemonaid - 07-11-2020
Not exactly what you want but check out page 7 http://targetz.com/targets07.htm
Help! Looking for this target - Sinclair - 07-11-2020
mdram Wrote:see if this works
i have it in autocad now, so i can tweek it if you like
Hi, great job, but could you change the black rings to grey? Black or any solid color on printable targets use up way too much ink. Maybe a hatch pattern? I am no expert with AutoCAD, but if you have went this far, tweeking it should be easy.
This just what I have been looking for some time now. I am starting a three ring binder where I can keep my targets for future reference and this one is the cats meow. Anybody figure out where it came from?
Help! Looking for this target - Sinclair - 07-11-2020
Lemonaid Wrote:Not exactly what you want but check out page 7 http://targetz.com/targets07.htm
Lemonaid, I have not been able to modify any of them to my needs. What has been your experience? Great source of targets, especially the fun targets.
Help! Looking for this target - mdram - 07-11-2020
Sinclair Wrote:Hi, great job, but could you change the black rings to grey? Black or any solid color on printable targets use up way too much ink. Maybe a hatch pattern? I am no expert with AutoCAD, but if you have went this far, tweeking it should be easy.
This just what I have been looking for some time now. I am starting a three ring binder where I can keep my targets for future reference and this one is the cats meow. Anybody figure out where it came from?
here ya go
Help! Looking for this target - Lemonaid - 07-11-2020
Sinclair Wrote:Lemonaid, I have not been able to modify any of them to my needs. What has been your experience? Great source of targets, especially the fun targets.
Ha! What I use the most now is a 1 inch square cut out in an old credit card and a magic marker. Included in our range fee is one free target and I get a big one, turn it backwards and put 1 inch squares on it.
Help! Looking for this target - mdram - 07-11-2020
heres a couple i use, one has 1/10 mil lines with .5 mil highlighted
the other is in 1/4"
Help! Looking for this target - Sinclair - 07-12-2020
mdram:
Great, thank you. It is hard to find Mill targets. My rifle scope is graduated in Mils so it takes some mental gymnastics to use standard targets as feedback for adjustments while shooting.
Help! Looking for this target - tdbru - 07-12-2020
mdram,
thanks. by the way is the MOA target MOA or 1" 1 MOA = 1.047" @ 100 yards. you probably knew that.
-tdbru
Help! Looking for this target - Klem - 07-12-2020
tdbru Wrote:mdram,
thanks. by the way is the MOA target MOA or 1" 1 MOA = 1.047" @ 100 yards. .
-tdbru
Even if the original is not you can increase and decrease the size of the document on the printer scale.
Help! Looking for this target - tdbru - 07-12-2020
ah... thanks Klem!! you are the thinking man for sure.
-tdbru
Help! Looking for this target - mdram - 07-12-2020
tdbru Wrote:mdram,
thanks. by the way is the MOA target MOA or 1" 1 MOA = 1.047" @ 100 yards. you probably knew that.
-tdbru
i did say it was 1/4"
but yeah i knew it was 1/4" and 1"
if you like i an make it in 1.047 and 1/4 increments
Help! Looking for this target - mdram - 07-12-2020
moa updated, added inch
Help! Looking for this target - mdram - 07-12-2020
also added a link in my sig to a google drive folder with them
Help! Looking for this target - FRB6.5 - 07-12-2020
mdram, thanks for making and sharing those.
Help! Looking for this target - mdram - 07-12-2020
no problem. if anyone needs anything made, just let me know
Help! Looking for this target - biodsl - 07-12-2020
this was above and beyond, mdram! Thanks much!