+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Bolt Actions & Single Shots (https://65grendel.com/forumdisplay.php?fid=17)
+--- Thread: Howa Mini Action Wrench (/showthread.php?tid=21773)
Howa Mini Action Wrench - JSH - 08-04-2020
What action wrench are you using for the Howa Mini?
Jeff
Howa Mini Action Wrench - ricsmall - 08-04-2020
I would think that a Remington 700 action wrench, the outside clamping type would work. Flip the bottom clamp block to the flat side to engage the flat bottom on the mini action. Thats how I use it on flat bottom actions of other brands
Howa Mini Action Wrench - JSH - 08-10-2020
Well, got the barrel off after several trys. Ended up having to make a relief cut close to the receiver. Rediculously tight.
Howa Mini Action Wrench - ricsmall - 08-11-2020
JSH Wrote:Well, got the barrel off after several trys. Ended up having to make a relief cut close to the receiver. Rediculously tight.
This is common with howas/vanguards. Also the few tikkas Ive barreled.