+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Bolt Actions & Single Shots (https://65grendel.com/forumdisplay.php?fid=17)
+--- Thread: Howa mini action scope rings... (/showthread.php?tid=23610)
Howa mini action scope rings... - Trumpet - 08-07-2021
So I have everything I need to finish my .223 build except the scope rings. I have a Vortex Diamondback tactical 4-16x44 on the way. Rifle is a 20" HB and I'm using an EGW base. That being the case will Vortex or Burris XTR low rings work? Or, should I go with medium?
Howa mini action scope rings... - grayfox - 08-07-2021
With a Pic rail the low rings will work. I have that 4-16x44 DB tactical mounted, well on a RAP but I've had them on the howa too. The rail gives you a bit more height so you should be gtg.
I use the vortex rings, get the tac ones in a pair (about $38) that way they are matched. the ones with 3 torx screws to a side on top. I don't like the QD style, they have come loose on me (don't remember if they were vortex or what), so I always get the ones without that little throw lever.
I have not tried the burris ones so can't speak to them.
Howa mini action scope rings... - kmon - 08-07-2021
I have never had a scope mounting problem with Burris rings and use them on quite a few rifles that are a lot harder on them than the Grendel. My 50BMG had the 30mm Burris rings on it and the scope stayed in place for lots of shooting
Howa mini action scope rings... - Trumpet - 08-07-2021
thanks. I looked at the cheapie Vortex but some of the reviews weren't so hot, and even Vortex recommended lapping them if using them with a scope. SO, I went with a set of the Weaver "six hole" tactical rings.
Howa mini action scope rings... - PaulieV - 08-10-2021
I've got that same scope on a 6.5 Grendel mini sporter using MDT 20 MOA base and MDT rings. Clearance is fine although tight, I doubt I'll get a bigger bolt knob on there if I wanted one. Stock fit is good with the standard stock.
Howa mini action scope rings... - Oso Polaris - 08-10-2021
I have the same setup with MDT Rail and medium rings. I have installed the Badger Ordnance Mini-tactical knob on a couple of my CZ 527's and it is right-sized for this platform. At some point I will also do same bolt knob upgrade to the Howa Mini.