+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL FORUM NEWS (https://65grendel.com/forumdisplay.php?fid=5)
+--- Forum: Welcome New Members (https://65grendel.com/forumdisplay.php?fid=23)
+--- Thread: Hey, Y'All, from NE Tennessee! (/showthread.php?tid=24525)
Hey, Y'All, from NE Tennessee! - Mlnemman - 05-10-2022
I am about to build a PSA, AR15, in 6.5 Grendel. Would welcome any hints, tips, or whatnottodos.
Hey, Y'All, from NE Tennessee! - sundowner - 05-10-2022
Welcome to the horde from Wisconsin , My 20" PSA upper is a tack driver .
Hey, Y'All, from NE Tennessee! - VASCAR2 - 05-10-2022
Welcome to the forum Minemmman!
Hey, Y'All, from NE Tennessee! - just_john - 05-10-2022
Welcome to the clan, Mn, from the great nation of Texas! The greatest advise we can offer is to start your builds in a large area with growing room as that will just be your first but certainly not your last. Tell us a bit about your goals.
Hey, Y'All, from NE Tennessee! - Mlnemman - 05-11-2022
Hey, Y'All! Actually, the Grendel will be my 3rd build so, yes, I am an addict. Too, I am a handloader. I have been in love with building and tweeking my own ammo ever since my Dad took me into his sanctum sanctorum and showed me how, on his Herters press. I still have that press and eight, like-new, die sets, although today they are more of a conversation piece. Once the build is finished, the rest of the fun will begin.
Any comments on PPU brass?
Hey, Y'All, from NE Tennessee! - 65Carcano - 05-11-2022
Which PSA upper did you get? I got a 20" one about a month ago, their website is sort of confusing with both of their 20" versions having identical descriptions.
Hey, Y'All, from NE Tennessee! - VASCAR2 - 05-11-2022
The original PPU 6.5 Grendel brass used large rifle primers and quality varied from lot to lot. Some lots of PPU brass could withstand a few moderate charge reloads. Other lots were only good for one or two reloads before primer pockets were to loose. I found S&B large rifle primers fit more snug in PPU brass.
The newer PPU brass with small rifle primer get pretty good reviews and seems more consistent from lot to lot. I havent used any of the new PPU SRP brass but still have a couple hundred Im using of the LRP brass. I tend to use some of my old PPU or fire formed x39 brass where I might not be able to recover my brass.
Hey, Y'All, from NE Tennessee! - Mlnemman - 05-12-2022
I bought the 18", stainless-steel, 8" twist.
Hey, Y'All, from NE Tennessee! - Mlnemman - 05-13-2022
Hey, VASCAR, thanks for mentioning the primer pockets. Turns out, they are small. Ever use CCI #41 (NATO) primers for your AR reloads?
Hey, Y'All, from NE Tennessee! - VASCAR2 - 05-14-2022
Yes Ive used mostly CCI 450 and CCI 41 for my AR-15s. The CCI450/41 have thicker cups which resist slam fires with the AR-15 floating firing pin.