+- Forums (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Build-It-Yourself & Custom Builds (https://65grendel.com/forumdisplay.php?fid=9)
+--- Thread: Odin Works Barrels? (/showthread.php?tid=26068)
Odin Works Barrels? - Mark611 - 11-22-2023
This has probably been asked before? but what is the opinion of say the Odin Works 18''DMR barrel, I see them on sale with a tunable gas block gas tube and BCG for around $350 you thoughts!
Odin Works Barrels? - BlogSarge - 11-22-2023
I have an Odin 18 in 6mm ARC. It shoots every Hornady factory load sub moa at 100 and 200 yards.
I built it on a BCM upper that I had to thermal fit, which helps I think.
Odin Works Barrels? - stonehog - 11-22-2023
I have 4 Odin Works barrels - 12" extralite Grendel, 20" Grendel DMR, 10.5" extralite 300 BLK, and 22" 6.5 Creedmoor. The 2 shorties have been sub moa with no issues in the gas dept. I need to shoot the longer ones more - the Creedmoor shows .8-1.5" accuracy but I haven't tested it much yet. Can't wait to get the Grendel DMR going - high hopes. In my experience, they are good, accurate barrels.
Odin Works Barrels? - Mark611 - 11-23-2023
I just purchased an OW 18'' DMR with the gas block and tube with BCG, we will see how it go's! I'm going to be replacing a new barrel from my BCA RSC upper, the BCG from OW won't work due the right side charging handle but I'll a spare bolt head!
Odin Works Barrels? - YardArm - 11-23-2023
Before buying, might want to contact their support, see if anyone responds. I bought their adjustable gas block. Ran great for about a year. Still under warranty. After 3 months on/off again attempts to get support, ZERO response.
I chucked it (and Odin) and bought Seekins. Much happier.
Odin Works Barrels? - CJW - 11-23-2023
I have 4 Oden uppers, all shoot great.
Odin Works Barrels? - Mark611 - 11-25-2023
I guess I'm going to find out! How does the adjustable gas block work?
Odin Works Barrels? - stonehog - 11-25-2023
Simple allen screw adjuster from the front. It has 2 screws in the same hole - one acting to lock the adjustment screw under it. When adjusting you need to remove the lock screw until you have the gas set.
Odin Works Barrels? - Mark611 - 11-26-2023
SG, thank you! I did find a few youtube videos,
Odin Works Barrels? - Mark611 - 11-26-2023
Barrel and all the parts showed up today! I have to get the rest of the tools to install it!
Odin Works Barrels? - v4lu3s - 12-04-2023
I recently built with their 20 inch kit, including the gas block and BCG, then added an Odinworks handguard as well. Only 145 rounds through it so far, but my most recent range time I was shooting 1.5" groups of Hornady Frontier (Every other box of Frontier I have bought in other guns was good for 2-2.5 inch groups). I actually has not even messed with adjusting the gas block yet. I am looking forward to better ammo and creating a handload to get some better accuracy, but I am happy with what I bought especially at the price.
Odin Works Barrels? - Mark611 - 12-05-2023
Well, I hope my hand loads are better, I have a Sanders 24'' and a BCA 18'' that shoot better than that @200m with my hand loads, I have also noticed my gas block on my OW does not have a set screw! anybody have 1 of their gas blocks without the set screw?
Odin Works Barrels? - v4lu3s - 01-25-2024
v4lu3s Wrote:I recently built with their 20 inch kit, including the gas block and BCG, then added an Odinworks handguard as well. Only 145 rounds through it so far, but my most recent range time I was shooting 1.5" groups of Hornady Frontier (Every other box of Frontier I have bought in other guns was good for 2-2.5 inch groups). I actually has not even messed with adjusting the gas block yet. I am looking forward to better ammo and creating a handload to get some better accuracy, but I am happy with what I bought especially at the price.
Follow up, I cannot get better than 1.5 inch Frontier groups, SST and ELD-M are good for 2-2.5 and i can get handloads to similar groups. I am hoping a different bullet will work better, but I am also trying to contact odin works without any luck. I am not yet ready to buy a new barrel...