6.5 Grendel Forum
Dry Firing - Printable Version

+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Target & Competition Shooting (https://65grendel.com/forumdisplay.php?fid=12)
+--- Thread: Dry Firing (/showthread.php?tid=7089)



Dry Firing - maverick5582 - 01-16-2014

Now that I have my new Geissele Match trigger I would like to know if it is necessary to use a "snap cap" or anything when "dry firing" the AR-15?


Dry Firing - Allen - 01-16-2014

You can dry fire it with the upper on, but don't if your testing the trigger with just the lower. Stop the hammer with your finger or a rag. The hammer will run into the lower without the upper attached and can damage the lower.


Dry Firing - maverick5582 - 01-16-2014

Allen Wrote:You can dry fire it with the upper on, but don't if your testing the trigger with just the lower. Stop the hammer with your finger or a rag. The hammer will run into the lower without the upper attached and can damage the lower.

I found that out today that the rag is better choice. The hammer spring is strong. Ouch!


Dry Firing - GMinor - 01-16-2014

Yes. Dry firing is a good thing. Employ it often.


Dry Firing - sarge19_8 - 02-28-2014

There is a dry firing device for the AR platform. It is plastic (probably delran) that inserts inside the bolt carrier to block the firing pin from being struck. It also prevents the hammer from going very far so all you have to do to recock is barely move the bolt back. Makes dry firing very painless on you and the rifle. Believe you can get these through Sinclair Intl.


Dry Firing - GMinor - 02-28-2014

sarge19_8 Wrote:There is a dry firing device for the AR platform. It is plastic (probably delran) that inserts inside the bolt carrier to block the firing pin from being struck. It also prevents the hammer from going very far so all you have to do to recock is barely move the bolt back. Makes dry firing very painless on you and the rifle. Believe you can get these through Sinclair Intl.

I have this. It is stupid. The AR-15 is capable of being dry fired thousands upon thousands upon thousands of times with no I'll effect.

The ONLY benefit of the dry fire device is a shorter pull to reset the trigger.

If you are worried about "pain" for your center fire rifle during dry fire you are uninformed.


Dry Firing - NugginFutz - 02-28-2014

Let me guess - not enough coffee?


Dry Firing - GMinor - 02-28-2014

That, and a new diet. I'm doing this Advocare 24 day challenge. Yesterday was crazy, but today is going to be great.


Dry Firing - Tedward - 02-28-2014

maverick5582 Wrote:I found that out today that the rag is better choice. The hammer spring is strong. Ouch!

Too funny, that was worth your painSmile

These work great if you are testing triggers on a regular basis or buy a kit and it is worth saving the nail on your finger. http://www.plastixrevolution.net/products/ar15-trigger-block


Dry Firing - maverick5582 - 02-28-2014

Tedward Wrote:Too funny, that was worth your painSmile

These work great if you are testing triggers on a regular basis or buy a kit and it is worth saving the nail on your finger. http://www.plastixrevolution.net/products/ar15-trigger-block

Yes. I did not make that mistake again. Thanks for the link.