Another Way to Call Hits/Misses

[Klem]

Interesting idea.

Another one that works is to separate two layers of metal fly screen with an insulator. Three corflute targets is the easiest way (Corflute:fly screen: Corflute: fly screen: Corflute, taped up). Can also use roofing insulation - anything that conducts and allows a bullet to pass through.

Then use the fly screens as the switching leads of a toggle circuit. Either build your own with a 555 timer or purchase. Use a flashing light nearby to signal the shooter. a 12V hazard LED works nicely in daytime. At night cover mostly with foil so the flashing light illuminates the surrounding but not your night sight. Jacketed rounds complete the circuit as they pass through. First hit, turns ON, next hit, turns OFF, ON, OFF, ON etc...

(useful for initiating explosives at distance when you have no other remote system or in an ECM environment. Disguised as anything you like...e.g. street signage).

Ready-made momentary toggle circuit used for bike/diving lights, $12;
http://www.taskled.com/techpiezotg.shtml

Or if you like to DIY and have a soldering iron;

Circuit


Looks like