03-13-2016, 05:45 PM
Went camping this weekend. Took this same Grendel out to see if I could get any shooting in. Brought on of my steel poppers and hiked it out as far as I could.
![[Image: IMG_04191_zpsqlixp3o5.jpg]](http://i1085.photobucket.com/albums/j422/LRRPF52/IMG_04191_zpsqlixp3o5.jpg)
I decided to have some fun and see if I could estimate range with mil relation, since I know the exact dims of the plate to be 12". The sun had gone down by the time I got back to the campsite, so I was working with limited light availability. Looked at my Kestrel for barometric pressure and temp, plus my max and average wind speeds. I had a full value wind from right to left between 5-10mph.
Target was .6 mils wide through the scope. I use any inch measures in fractions of a yard indicated without the decimal, so 12" working number is 333 (1/3 of 36").
Take TGT dims divided by mils read = range in yards. In this case, 333 / .6 = 555yds estimated. Strelok said I needed 4.2 mils.
I dialed up 4.2, held .75 mils into the wind, settled the gun on the barely visible little plate in the dark, exhaled as I took up slack in the trigger, hit respiratory pause and broke the shot, followed through while listening for the hit. Couldn't hear a hit, but the kid with my electronic muffs said he heard it, so I let off 2 more, which I heard impact 2x.
Hiked up to the target and found 3 hits.
![[Image: IMG_04181_zpsl5rykubw.jpg]](http://i1085.photobucket.com/albums/j422/LRRPF52/IMG_04181_zpsl5rykubw.jpg)
This is what it looked like through the spotter scope in the morning.
![[Image: IMG_04201_zps7tuspl8i.jpg]](http://i1085.photobucket.com/albums/j422/LRRPF52/IMG_04201_zps7tuspl8i.jpg)
![[Image: IMG_04222_zpserxhkwtg.jpg]](http://i1085.photobucket.com/albums/j422/LRRPF52/IMG_04222_zpserxhkwtg.jpg)
It's like you can't miss with this little rifle, if you know what you're doing.
![[Image: IMG_04191_zpsqlixp3o5.jpg]](http://i1085.photobucket.com/albums/j422/LRRPF52/IMG_04191_zpsqlixp3o5.jpg)
I decided to have some fun and see if I could estimate range with mil relation, since I know the exact dims of the plate to be 12". The sun had gone down by the time I got back to the campsite, so I was working with limited light availability. Looked at my Kestrel for barometric pressure and temp, plus my max and average wind speeds. I had a full value wind from right to left between 5-10mph.
Target was .6 mils wide through the scope. I use any inch measures in fractions of a yard indicated without the decimal, so 12" working number is 333 (1/3 of 36").
Take TGT dims divided by mils read = range in yards. In this case, 333 / .6 = 555yds estimated. Strelok said I needed 4.2 mils.
I dialed up 4.2, held .75 mils into the wind, settled the gun on the barely visible little plate in the dark, exhaled as I took up slack in the trigger, hit respiratory pause and broke the shot, followed through while listening for the hit. Couldn't hear a hit, but the kid with my electronic muffs said he heard it, so I let off 2 more, which I heard impact 2x.
Hiked up to the target and found 3 hits.
![[Image: IMG_04181_zpsl5rykubw.jpg]](http://i1085.photobucket.com/albums/j422/LRRPF52/IMG_04181_zpsl5rykubw.jpg)
This is what it looked like through the spotter scope in the morning.
![[Image: IMG_04201_zps7tuspl8i.jpg]](http://i1085.photobucket.com/albums/j422/LRRPF52/IMG_04201_zps7tuspl8i.jpg)
![[Image: IMG_04222_zpserxhkwtg.jpg]](http://i1085.photobucket.com/albums/j422/LRRPF52/IMG_04222_zpserxhkwtg.jpg)
It's like you can't miss with this little rifle, if you know what you're doing.
NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
