Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
TAC powder with 6 AR
#8
I don't see why TAC wouldn't work with the varmint, hunting wt bullets like V-Max 75 or 87. I haven't tried TAC but I have tried RL15, AR Comp, Varget which are right there with TAC burn rate in the 87-95 grain pills. I've used the starting load data for the 6BR with good results and worked from there checking for pressure ect. haven't broken anything or damaged any cases. PPC load data would be a good starting point.

I always seem to come back to H4895 and 8208 because those powders work and I have many lbs. of it on hand.

QL says with my setup which is an AR, 87 V-Max coal of 2.125 and Tac 30. grains,is near max be careful.
Reply


Messages In This Thread
TAC powder with 6 AR - by bachekermooni - 01-14-2019, 02:18 AM
TAC powder with 6 AR - by A5BLASTER - 01-14-2019, 03:04 AM
TAC powder with 6 AR - by bachekermooni - 01-14-2019, 03:06 AM
TAC powder with 6 AR - by A5BLASTER - 01-14-2019, 03:12 AM
TAC powder with 6 AR - by LR1955 - 01-14-2019, 01:17 PM
TAC powder with 6 AR - by bachekermooni - 01-15-2019, 06:55 PM
TAC powder with 6 AR - by 454bore - 01-16-2019, 02:44 PM
TAC powder with 6 AR - by soloelcap - 01-17-2019, 03:18 AM
TAC powder with 6 AR - by LR1955 - 01-17-2019, 01:08 PM
TAC powder with 6 AR - by 454bore - 01-17-2019, 02:33 PM
TAC powder with 6 AR - by soloelcap - 01-18-2019, 05:09 PM
TAC powder with 6 AR - by bachekermooni - 04-08-2019, 05:39 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)