Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Accuracy: Finding the bar?
#19
Thanks for this thread. This Thursday I plan on breaking in the barrel on my first Grendel and this thread has been informative as to what I can realistically expect from it. I really enjoy shooting at 300, 600 and 800 and want a gas gun that can reach out past 300 so I plan on exploring the limits of the Grendel's accuracy within the limits of my own abilities. The rifle is a Sanders Armory upper on a Rock River match lower.

I started shooting long range causally 7 or 8 years ago and started shooting F class for about a year shooting at the low end of the expert lvl in both mid and long range. I won't be able to stretch it out past 100 for a few months but I am looking forward to posting a lot of range reports and load development on it's progress. The goal is to get 10 shot groups less than 1 MOA out to 300 and less than 1.5 MOA at 600 before the end of summer. Whether that is realistic or not remains to be seen. I am not shy about doing a barrel change out or other mods to the rifle if I think it would be worthwhile but there's not too much I can do about the guy pulling the trigger. I think this is going to be a fun summer project

Oh and on the F class targets the 10 ring on a 300 yard is a bit less than a MOA while the 800 has 1.25 MOA 10 ring. That is because the NRA uses the same target at 1000 with a 10 inch 1 MOA X ring. That makes 300 yard contests as tough as the 800 which would get more environmental effects. Never had a chance to play with 1000 yet but will have soon
Reply


Messages In This Thread
Accuracy: Finding the bar? - by Lemonaid - 03-15-2019, 10:11 AM
Accuracy: Finding the bar? - by LR1955 - 03-15-2019, 12:19 PM
Accuracy: Finding the bar? - by Klem - 03-15-2019, 02:22 PM
Accuracy: Finding the bar? - by Lemonaid - 03-15-2019, 03:11 PM
Accuracy: Finding the bar? - by Lemonaid - 03-15-2019, 03:14 PM
Accuracy: Finding the bar? - by lazyengineer - 03-15-2019, 04:46 PM
Accuracy: Finding the bar? - by Lemonaid - 03-15-2019, 05:10 PM
Accuracy: Finding the bar? - by LR1955 - 03-15-2019, 05:11 PM
Accuracy: Finding the bar? - by Lemonaid - 03-15-2019, 07:09 PM
Accuracy: Finding the bar? - by Drillboss - 03-15-2019, 10:32 PM
Accuracy: Finding the bar? - by Klem - 03-15-2019, 11:48 PM
Accuracy: Finding the bar? - by Lemonaid - 03-16-2019, 02:45 AM
Accuracy: Finding the bar? - by lazyengineer - 03-16-2019, 03:04 AM
Accuracy: Finding the bar? - by Lemonaid - 03-16-2019, 04:02 AM
Accuracy: Finding the bar? - by lazyengineer - 03-16-2019, 04:44 AM
Accuracy: Finding the bar? - by LR1955 - 03-16-2019, 12:53 PM
Accuracy: Finding the bar? - by snell - 03-16-2019, 01:38 PM
Accuracy: Finding the bar? - by Lemonaid - 03-17-2019, 03:32 AM
Accuracy: Finding the bar? - by SCJim - 04-23-2019, 07:51 PM
Accuracy: Finding the bar? - by Texas - 04-23-2019, 10:38 PM
Accuracy: Finding the bar? - by BCHunter - 04-23-2019, 11:42 PM
Accuracy: Finding the bar? - by Lemonaid - 04-24-2019, 12:10 AM
Accuracy: Finding the bar? - by Herzo - 10-31-2019, 03:11 AM
Accuracy: Finding the bar? - by Herzo - 10-31-2019, 03:12 AM
Accuracy: Finding the bar? - by Lemonaid - 10-31-2019, 04:10 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)