Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
6 mm Grendel PTG reamer freebore
#8
bachekermooni Wrote:LtDAN. Yes. The rifle is finished and the break-in is complete. The problem I have is with the 90 gr Hornady ELD-X. When I load it being 20 mil off of lands, I get this (2.1890" COL). That leaves me very little room for powder. At 29 gr of CFE 223 and 28 gr of TAC it is getting compressed already.

I am going to the range on Fri to see what happens. My GS told me if needed he will add another 50-60 thou to the throat. Not sure if that is a good idea.

That seems a little short in the throat none of the 6.5 barrels (5) are that short in the throat. I think you need to bump it a little more. My BHW 6.5 G barrel is the tightest throat and the coal for the 95 vmax which is the fattest ogive at .020 off 2.212
Reply


Messages In This Thread
6 mm Grendel PTG reamer freebore - by papapaul - 05-06-2019, 11:22 AM
6 mm Grendel PTG reamer freebore - by LtDan - 05-16-2019, 04:44 AM
6 mm Grendel PTG reamer freebore - by LtDan - 05-19-2019, 08:31 PM
6 mm Grendel PTG reamer freebore - by LtDan - 05-19-2019, 08:32 PM
6 mm Grendel PTG reamer freebore - by LtDan - 05-23-2019, 03:01 AM
6 mm Grendel PTG reamer freebore - by soloelcap - 05-23-2019, 08:21 PM
6 mm Grendel PTG reamer freebore - by soloelcap - 05-24-2019, 12:29 AM
6 mm Grendel PTG reamer freebore - by Overwatcher - 06-04-2019, 12:51 AM
6 mm Grendel PTG reamer freebore - by 454bore - 06-05-2019, 11:03 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)