06-20-2021, 01:28 PM
6.5G Master Wrote:Looks like the 16.5 CZ can be had for $750 but I have read where there are (were?) issues with the bolt getting in the way of the scope is that still an issue? Also, are there any mods needed to the CZ in order to bring it up to speed? For example it seems the howa needs that bottom metal mod to be setup right so the Howa is really going to be $150 more expensive than anything I find as I account for that mod.
The CZ bolt handle /scope interference was resolved several years back. The factory handle is now longer to provided the necessary clearance around the typical scope. The only thing that you might contemplate is at some point upgrading the bolt knob to something like the Badger Ordanance's Mini-knob.
As to the Howa you are going to need to buy replacement bottom metal and then it may also require fitting into you stock (not a straight drop in). If you plan to use an aftermarket bottom metal that also incorporates an internal magazine, such as Oregunsmithing's model, then you may also want/need to do a bedding job. Regardless of which aftermarket stock you buy, they are inlet for the factory Howa plastic bottom trigger guard and the removable magazines, which is pretty wide. I found this opening to be much larger than what is needed for the replacement internal magazine, forcing me to do some backfilling around the magwell. This might not be essential, but I feel better knowing that everything is locked in place and no risk of it shaking loose or out of alignment.