I think this accuracy is ok
#12
Whoooaa AllaninTexas, beauties looking rig! Looks very similar to Black Creek Labs Bison. Good shooting too.
I’ve left mine in the Tupperware stock, used grinding compound paste and a few hundred cycles in the bolt and it’s smooth, really smooth. Bolt fitment (until lock up) could have tighter tolerances, not the end of the world. No problems with feeding in my Canadian version with the pinned ten round mag. I cut a few rounds of magazine spring out and it cycles ammunition flawlessly and you don’t have be aggressive with the bolt. With factory trigger I trimmed some of the spring rounds off like 1 round (start with less) and trigger now it great, I’d guess 2.5lbs or so, much improved. Best factory ammo is Hornady Black 123g. Best hand loads Hornady ELD-M 100g over IMR8208XBR also CFE223. In addition 100g Nosler Partitions with same mentioned powder along with Alliant RL10x. Well under 1” 5 shot groups at 100 metres. My scope is Vortex 3-15 X 42 HD LHT, in MOA really like it and has little red light at X hairs for low light.
Bought mine as a UTV/Truck gun that I don’t have to worry about bumps and bruises. Lastly shortened length of pull by about 1/2-3/4”. It’s a nice “inexpensive” (heh, scope was more than rifle in Canada), low recoil, compact rifle, inexpensive to reload for too. Only downside is I can’t legally run a suppressor in Canada, so it pretty loud!
Cheers
Reply


Messages In This Thread
I think this accuracy is ok - by allenintexas - 01-13-2022, 10:40 PM
I think this accuracy is ok - by Happy2Shoot - 01-13-2022, 11:26 PM
I think this accuracy is ok - by tdbru - 01-14-2022, 02:33 AM
I think this accuracy is ok - by HokeyPokeyKid - 01-14-2022, 03:27 AM
I think this accuracy is ok - by allenintexas - 01-14-2022, 05:04 PM
I think this accuracy is ok - by allenintexas - 01-14-2022, 05:45 PM
I think this accuracy is ok - by allenintexas - 01-14-2022, 05:54 PM
I think this accuracy is ok - by tdbru - 01-14-2022, 07:37 PM
I think this accuracy is ok - by EastTNHunter - 01-15-2022, 11:03 PM
I think this accuracy is ok - by Rosecrans1 - 01-21-2022, 02:12 AM
I think this accuracy is ok - by Dragonscout - 04-20-2022, 03:59 PM
I think this accuracy is ok - by JCart - 04-20-2022, 05:13 PM
I think this accuracy is ok - by LRRPF52 - 04-23-2022, 01:57 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)